2021 Updated Verified Pass C_IBP_2105 Study Guides & Best Courses
Ultimate Guide to the C_IBP_2105 - Latest Edition Available Now
NEW QUESTION 34
You are creating advanced copy operators as part of an SAP IBP solution that is being implemented.
What do you need to be aware of when defining data transfer? Note: There are 2 correct Answers to this question.
- A. Selecting by attribute with option 'contain' is possible.
- B. Specifying target key figure that is time independent is possible.
- C. Specifying target key figure is mandatory.
- D. Specifying source key figure is mandatory.
Answer: C,D
NEW QUESTION 35
You are modeling the introduction of a new product using Lifecycle Planning functionality in SAP IBP.
What is mandatory to create in your planning area for the setup of reference product(s) to work? Note:
There are 2 correct Answers to this question.
- A. Definition of an attribute representing the product ID
- B. Definition of Actual Sales business meaning for one key figure
- C. Definition of an attribute representing the product description
- D. Planning objects for the new product
Answer: A,D
NEW QUESTION 36
You are using the Resource Location master data type. How do you specify capacity supply as time- dependent?
- A. Set the Capacity Supply Time Series indicator in the Resource Location master data type.
- B. Maintain the CAPASUPPLY key figure values in the planning area.
- C. Set the Capacity Supply additional attribute in the time profile.
- D. Set the Capacity Supply Time Series indicator attribute as a key.
Answer: A
NEW QUESTION 37
Which of the following are functions of SAP IBP for demand? Note: There are 3 correct Answers to this question.
- A. Demand sensing of demand data using the supply chain algorithm library
- B. Demand sensing of demand data using predictive analytics tools
- C. Detailed statistical analysis of demand data using predictive analytics tools
- D. Embedded, on-the-fly demand analytics
- E. Detailed statistical analysis of demand data using the supply chain algorithm library
Answer: A,C,D
NEW QUESTION 38
You want to restrict value entries outside of a specified range into a key figure. What setting will you use to achieve that goal?
- A. By restricting data input in the Key Figure Configuration app
- B. IBP -> Lock Selected cells in IBP Formatting Sheet tab
- C. IBP -> Data Validation in IBP Formatting Sheet tab
- D. Select Protect Active Worksheet in the About section of SAP IBP tab
Answer: A
NEW QUESTION 39
Which one of the following values can you use in disaggregation expressions?
- A. KF1 (Stored) + Helper KF
- B. If (Attribute)=0
- C. KF1 (Stored) + KF2 (Stored) + Attribute
- D. KF1 (Calculated) + Attribute
Answer: B
NEW QUESTION 40
You want to display and edit data in different units of measure (UOM). Which of the following must you consider before you use UOM? Note: There are 3 correct Answers to this question.
- A. Units of measure are usually not time-dependent.
- B. Units of measure are usually not time-independent.
- C. Unit of measure is an attribute of a master data type, such as Product.
- D. Analytics provide the user with the option to select the target unit of measure.
- E. Conversion to the target unit of measure is handled by functionality of SAP IBP Excel UI
Answer: A,C,D
NEW QUESTION 41
What type of key figure requires a planning level to have all attributes as roots?
- A. The time independent key figure, such as FCSTMAPE
- B. The conversion key figure, such as exchange rate
- C. The attribute transformation key figure, such as PERIODID1
- D. The special key figure marked as an aggregate key figure
Answer: D
NEW QUESTION 42
Which of the following functional areas are included in the out-of-the-box SAP Integrated Business Planning application for sales and operations? Note: There are 3 correct Answers to this question.
- A. Consensus demand planning
- B. Finite resource capacities planning
- C. Rough-cut supply planning
- D. Executive review
- E. Demand-driven materials requirement planning
Answer: A,C,D
NEW QUESTION 43
Which of the following are the key features of SAP Supply Chain Control Tower? Note: There are 2 correct Answers to this question.
- A. Ability to create smart alerts
- B. Ability to balance demand and supply and attain financial targets
- C. Ability to create a feasible plan
- D. Ability to use task and case management
Answer: A,D
NEW QUESTION 44
What differentiates the Create New (Simple copy) and the Create New with Dependencies (Advanced copy) functions of a planning area? Note: There are 2 correct Answers to this question.
- A. Associated attributes are only shared between the original and the new planning area when you use the Create New (Simple copy) function.
- B. The planning view favorites are only copied when you use the Advanced copy.
- C. Master data is only shared between the original and the new planning area when you use the Create New (Simple copy) function.
- D. A copy of the time profile is only created when you use the Create New with Dependencies (Advanced copy) function.
Answer: C,D
NEW QUESTION 45
You are adding a value-based filter to a planning view. Which of the following conditions apply? Note:
There are 3 correct Answers to this question.
- A. These filters can be used together with attribute totals in the same planning view.
- B. The alerts dashboard is not available if a value-based filter is set for the open planning view.
- C. These filters are always applied based on the values stored in the database.
- D. You can add (or delete) planning objects to a planning view after these filters are applied.
- E. You can only apply one value-based filter per planning view.
Answer: B,C,E
NEW QUESTION 46
Where can we see the results of Time Series analysis in SAP IBP?
- A. Time Series Property Attribute in Customer Source
- B. Time Series Property Attribute in Customer Product
- C. Time Series Property Attribute in Product
- D. Time Series Property Attribute in Customer
Answer: C
NEW QUESTION 47
While modeling for a large machine with high capital needs, you need it to run cost effectively with minimum utilization, even if it means producing more than demand. Which solution would apply to this scenario? Note: There are 2 correct Answers to this question.
- A. Enough demands can be pulled forward and pull production will occur.
- B. Capacity leveling will be possible for production and storage resources.
- C. Excess stock can be generated and will need to be staged in an overflow warehouse.
- D. Balance can be achieved between excessive prebuild and minimum utilization by incorporating violation costs.
Answer: A,D
NEW QUESTION 48
You need to define a new logic for a key figure to drive values from the PERPRODCUSTREGION level to the PERPRODCUST level. Which of the following configuration options are possible for this process?
Note: There are 2 correct Answers to this question.
- A. Splitting the values from aggregated to detailed level based on time profile attribute
- B. Splitting the values from aggregated to detailed level based on stored split-factor key figure
- C. Splitting the values from aggregated to detailed level using multiplication by the proportions
- D. Splitting the values from detailed to aggregated level by using copy operator
Answer: B,C
NEW QUESTION 49
......
SAP C_IBP_2105 Exam Description:
The "SAP Certified Application Associate - SAP Integrated Business Planning" certification exam verifies that the candidate possesses the basic knowledge in the area of the SAP supply chain planning. This certificate proves that the candidate has a basic overall understanding within this consultant profile of the industry solutions, and can implement this knowledge practically in projects under guidance of an experienced consultant. It is recommended as an entry-level qualification to allow consultants to get acquainted with the fundamentals of SAP Integrated Business Planning. Please note that this 2105 version of the exam takes part in the Stay Current with SAP Global Certification program. Once you pass this version of the exam, make sure that you start your stay current process. You will be required to take the quarterly stay current assessment for all subsequent SAP IBP releases via the SAP Learning Hub starting with the 2108 release to maintain your SAP IBP consultant certification status and badge. In order to participate in the stay current program and access the stay current enablement and assessment, you will need at minimum an SAP Learning Hub, edition for IoT and Digital Supply Chain subscription. (https://training.sap.com/learninghub)
SAP IBP Certification Exam Topics:
| Topic Areas | Topic Details, Courses, Books | Weighting |
|---|---|---|
| Key Figures & Attributes | Create and use key figures and attributes. IBP200 (SAP IBP OD 2105), IBP300 (SAP IBP OD 2105) | > 12% |
| User Interface | Use the Fiori Launchpad to customize the UI, work with Excel UI IBP200 (SAP IBP OD 2105) | > 12% |
| Supply and Response | Configure supply planning, run various solvers to generate planning results IBP100, IBP110, IBP200 (SAP IBP OD 2105), IBP700 (SAP IBP OD 2105) | > 12% |
| Analytics and Reporting | Define and view information with user-defined charts and dashboards. IBP200 (SAP IBP OD 2105), IBP300 (SAP IBP OD 2105) | < 8% |
| S&OP Review | Describe how IBP extends the logic of S&OP in the network using advanced demand and supply planning integrated with financial plans. IBP200 (SAP IBP OD 2105) | < 8% |
| Solution Architecture | Describe the benefits of implementing SAP's Integrated Business Planning solution. IBP100, IBP200 (SAP IBP OD 2105), IBP300 (SAP IBP OD 2105) | < 8% |
| Demand Planning | Create statistical forecast using historical data with basic methods. IBP200 (SAP IBP OD 2105), IBP600 (SAP IBP OD 2105) | 8% - 12% |
| Inventory | Optimize inventory in the supply chain utilizing algorithms that derive inventory targets. IBP100 | < 8% |
| General Configuration of a Planning Area | Display, create, copy, edit, check, and activate a planning area. IBP200 (SAP IBP OD 2105) | > 12% |
| Planning Operators & Application Jobs | Use Planning Operators. IBP300 (SAP IBP OD 2105) | > 12% |
Dumps MoneyBack Guarantee - C_IBP_2105 Dumps Approved Dumps: https://www.itexamsimulator.com/C_IBP_2105-brain-dumps.html
