F5 301a Exam Preparation Guide and PDF Download
Verified & Correct 301a Practice Test Reliable Source Aug 29, 2025 Updated
NEW QUESTION # 87
A BIG IP device delivers the online shopping website https://shop.example.com. Two pool members handle the traffic. An iRule directs requests with the hip parameter "environment=development" to a third pool member for a staging environment.
Which combination of profiles is needed at minimum?
- A. tcp, http, clientssl
- B. http, clientssl, persistence
- C. tcp, http, request logging
- D. tcp, clientssl, serverssl
Answer: A
NEW QUESTION # 88
A pool has four members. Ail of the servers have been designed and configured with the same application. Each client's request can significantly the performance of the servers.
Which load balancing method should the LTM Specialist use to maintain a relatively even load across all servers?
- A. Priority Group
- B. Observed
- C. Least Connections
- D. Ratio
Answer: C
NEW QUESTION # 89
An ITM Specialist has the configuration shown:
The LTM Specialist needs to create a new virtual server in part B.
Which virtual address(es) should be used for the new virtual server?
- A. 10.120.0.1 only
- B. 10.90.0.1 and 10.100.0.1
- C. 10.90.0.1 and 10.12.0.1
- D. 10.100.0.1 and.10.120.0.1
Answer: D
NEW QUESTION # 90
A virtual server is using a TCP profile based on the top-wan-optimized profile for a streaming application Users report videos are loading slowly.
Which setting should be modified in the TCP profile to optimize the application?
- A. Disable Reset on Timeout
- B. Disable Nagle's Algorithm
- C. Disable Slow Start
- D. Disable Selective ACKs
Answer: C
NEW QUESTION # 91
in which Application Visibility and Reporting (AYR) profile must the SMTP profile be defined to configure notifications via email?
- A. custom analytics profile
- B. App analytics profile
- C. default analytics profile
- D. virtual server profile
Answer: A
NEW QUESTION # 92
Refer to the following iRule:
What is a complete list of profiles that must be applied to the virtual server for this iRule?
- A. TCP, HTTP, Client SSL
- B. Fast L4 , HTTP, Stream
- C. Fast L4, HTTP
- D. TCP, HTTP
Answer: D
NEW QUESTION # 93
An LTM Specialist needs to add a pool that will load balance MYSOL services. It has four members, each with differing hardware platforms. All pool members are already assigned to another pool for load balancing FTP traffic.
Which load balancing method is most effective when the LTM Specialist sets up the pool?
- A. Predictive member)
- B. Round Robin
- C. Observed (node)
- D. Least Connections (node)
Answer: C
NEW QUESTION # 94
A virtual server configuration for traffic destined to a server is as shown:
FTP traffic is destined to the 192.168.1.101 server from the source of 192.168.2.129.
Based on precedence, which virtual server accepts this traffic?
- A. MyVS4
- B. MyV53
- C. MyVS1
- D. MyVS2
Answer: D
NEW QUESTION # 95
An LTM Specialist plans to enable connection mirroring for a virtual server in an HA environment.
What must the LTM Specialist consider before implementing the configuration change?
- A. The add-on license that is required for this feature to be available
- B. Creating the required separate interface for connection mirroring
- C. Decreased number of possible concurrent connections to that virtual server
- D. Impact on system performance that might be noticeable
Answer: D
Explanation:
Connection mirroring will bring performance consumption
NEW QUESTION # 96
An LTM Specialist has recently taken over administration or an LTM device that has experienced resource availability issues. The LTM device will need to be solely used for load balancing and SSL offload. Previously, the LTM device was also used to provide statistical analysis of application traffic. However, that functionality has been moved to a third party solution.
Based on the output below, which configuration change should be made to ensure the LTM module receives the most amount of resources?
- A. Provision AVR to Minimum, Provision LTM to Dedicated
- B. Provision LTM to Dedicated, Provision AVR to Dedicated
- C. Provision AVR to none. Provision LTM to Dedicated
- D. Provision AVR to Minimum. Provision LTM at Maximum
Answer: C
NEW QUESTION # 97
A new HITP server has been deployed on an LTM device. The application running on the server must be monitored by the LIM device. The following is required:
A new HITP server has been deployed on an LTM device. The application running on the server must be monitored by the LIM device. The following is required:
When the server is unavailable, it will send an HTTP status code of 200 in response to a request for the status html page.
When the server is available. I will send and HTTP status code of 201 in response to a request for the status html page.
When the 200 status code is received, the pool member should receive No new connections.
Which configuration change should be made to meet these requirements?
- A. set the Send String to Get /status html and the Receive Disable String to 200 and Receive String to 201.
- B. set the Send String to GET/ status html and the Receive String to 200 and Receive Disable String to 201.
- C. set the Send String to GET Arian and the Receive Disable String to 200 and Receive String to 201.
- D. set the Send String to GET Arian and the Receive String to 200 and Receive Disable String to 201.
Answer: A
NEW QUESTION # 98
To improve application security, an LTM Specialist must configure a BIG application access. The BIG IP system to authenticate the client certificate before permitting application access. The BIG-IP system must also support the ability to red to redirect users to a certificate enrolment system without generating a browser error.
Within the Client SSL profile, which value should the LTM Specialist select for the Client Certificate option?
- A. Demand
- B. Request
- C. ignore
- D. Require
Answer: D
NEW QUESTION # 99
Which Standard Virtual Server settings should an LTM Specialist use to load balance across routed path of two different ISPs?
- A. both address and port translation enabled
- B. address translation enabled and port translation disabled
- C. address translation disabled and port translation enabled
- D. both address and port translation disabled
Answer: A
NEW QUESTION # 100
TWO LTM devices are in the same Device Group and configured for Ac live/Standby Failover. The LTM Specialist observes that the HA Active and Standby device constantly changes state. All network links use the default route domain A dedicated fiber ink is used for the HA connection with a latency of 250 ms but no packet loss.
What is causing the change in failover state to occur?
- A. The HA network is using multicast IP.
- B. The HA network is using the default routing domain.
- C. The HA network latency is too high.
- D. The HA network is not configured for mirroring.
Answer: A
Explanation:
NEW QUESTION # 101
An LTM specialist needs to create a new account with the admin role called "newadmin' and access to all partitions.
Which tmsh command should be executed?
- A. create /auth user newadmin partition-access add {all-partitions {role admin }} prompt for-password.
- B. create / sys user newadmin partition-access add (all-partitions {role admin )} prompt-for-password.
- C. create /user newadmin partition-access add (all-partitions {role admin }} prompt- for-password.
- D. create /users newadmin partition-access add {all-partitions {role admin JJ prompt for-password.
Answer: A
Explanation:
Examining the use of commands, the creation of user is subordinate to auth
NEW QUESTION # 102
An LTM device receives a response string containing "error"
Which monitor type and parameter will mark the HTTP server as down?
- A. HTTP monitor, Receive String "error", and set the Reverse option to Yes
- B. HTTP monitor. Receive String "down", and set the Reverse option to Yes .... flag is
- C. HTTP monitor and Receive Disable String "error'' .... flag is disable
- D. HTTP monitor and Receive String "error'' ... flag is up
Answer: A
NEW QUESTION # 103
An LTM Specialist needs to create an iRule that creates persistence records based on a JSESSIONID cookie. If a persistence record already exists, then the iRule must persist the client connection according to the existing record.
Which persistence profile enables the iRule to meet these requirements?
- A. Source Address Affinity
- B. Cookie
- C. Universal
- D. Destination Address Affinity
- E. SSL
Answer: C
NEW QUESTION # 104
An LTM Specialist creates an Analytics wide to show the type of browsers used to access a certain application. However, the generated statistics only sum up all transaction for that application under one item called ' Aggregated.'' What should the LTM Specialist do to resolve this problem?
- A. Make sure ''User Sessions'' is selected in the Analytics profile
- B. Verify that the Analytics profile is assigned to the applications virtual server.
- C. Drill down into the stats to show the User Agents correlated in the Aggregated group.
- D. Make sure ''User Agent'' is selected in the Analytics profile.
Answer: D
NEW QUESTION # 105
AN LTM Specialist is setting up a new HTTPS virtual server to decrypt client traffic. SNAT the traffic and send the encrypted traffic to the poor member, the client's IP address must be included in the traffic sent to the pool member.
What is a complete set of profiles that must be configured for the virtual server to meet these requirements?
- A. TCP, Client SSL, HTTP
- B. TCP , Server SSL, HTTP
- C. TCP, Client SSL, Server SSL
- D. TCP, Client SSL, Server SSL, HTTP
Answer: D
NEW QUESTION # 106
An application is being load balanced through the LTM device using the configuration displayed below.
The network has been re-engineered to NAT all client connection. As a result, all client connections are hitting the same pool member.
Which changes should the LTM Specialist make in order to restore load balancing functionality wile maintaining session persistence?
- A. Change the virtual server type to Standard, add an http profile, and change the persistence profile to Destination Address
- B. Change the virtual server to Standard add an http profile, and change the persistence profile to Cookie persistence
- C. Change the virtual serer type to Forwarding (Layer 4) and leave the persistence type to hash source Address
- D. Leave the virtual server type set Performance (Layer 4) and change the persistence type to hash
Answer: B
NEW QUESTION # 107
......
Pass F5 301a exam Dumps 100 Pass Guarantee With Latest Demo: https://www.itexamsimulator.com/301a-brain-dumps.html
Free F5 301a Exam Files Downloaded Instantly: https://drive.google.com/open?id=1drbZpmsATi_SsmUTwZCHropmJS5TIT0V
