2025 Best D-PVM-OE-01 Exam Preparation Material with New Dumps Questions
Free D-PVM-OE-01 Exam Files Verified & Correct Answers Downloaded Instantly
EMC D-PVM-OE-01 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
NEW QUESTION # 83
Where is the automatic backup feature for the Solutions Enabler Group Name Services database set?
- A. SYMAPI variable
- B. SYMAPI options file
- C. Daemon options file
- D. SYMCLI environment variable
Answer: A
NEW QUESTION # 84
The web application server web_host_1 is deprecated. Remove all resources associated with the host to clean up the environment.
Using the simulator, complete the task.
Answer:
Explanation:
See the explanation for step by step solution.
Explanation:
We need to remove all resources associated with a deprecated web application server named web_host_1 in the Unisphere for PowerMax simulator.
Here's a step-by-step guide on how to accomplish this, based on typical Unisphere functionality and the context of the question:
Steps:
1. Launch the Simulator and Navigate to the Hosts Section
* Open Unisphere for PowerMax in your web browser.
* Log in to the simulator.
* In the left-hand navigation pane, click onHosts>Hosts. This will take you to the Hosts management view.
2. Locate the Host web_host_1
* In the Hosts view, you'll see a list of all configured hosts.
* Find the host named web_host_1. You might need to use the search or filtering options if there are many hosts listed.
3. Identify Associated Resources
* Before deleting the host, it's crucial to identify all resources associated with it. These typically include:
* Masking Views:These define the LUNs that a host can access.
* Storage Groups:These contain the volumes presented to the host.
* Port Groups:These define the connectivity paths (ports) used by the host.
* How to Find Associated Resources:
* Click on the web_host_1 host entry. This should open a details view or properties page for the host.
* Look for tabs or sections labeled "Masking Views," "Storage Groups," or similar.
* Note down the names of any masking views and storage groups associated with web_host_1.
4. Remove the Host from Masking Views
* Navigate toHosts>Masking Views.
* Locate the masking views that you identified in Step 3 as being associated with web_host_1.
* Open each masking view's properties.
* Remove the Host:There should be an option to edit the host list within the masking view. Find web_host_1 in the list of hosts and remove it.
* Save Changes:Save the changes to the masking view.
* Repeatfor all masking views associated with web_host_1.
5. Delete or Modify Storage Groups
* Navigate toStorage>Storage Groups.
* Locate the storage groups that were associated with web_host_1.
* Two Options:
* If the storage group is ONLY used by web_host_1:You can delete the entire storage group.
Select the storage group and click theDeletebutton (or a similar option).
* If the storage group is shared with other hosts:You need to remove the volumes associated with web_host_1 from the storage group.
* Open the storage group's properties.
* Go to the "Volumes" tab.
* Identify the volumes that were presented to web_host_1.
* Select those volumes and choose the option to "Remove from Storage Group" or a similarly worded option.
* Save the changes to the storage group.
6. Delete the Host
* Go back toHosts>Hosts.
* Select web_host_1.
* Click theDeletebutton (or a similar option, like a trashcan icon).
* Confirm that you want to delete the host.
7. Verify Removal (Optional)
* After deleting the host and modifying the storage groups and masking views, you can verify that the resources have been properly cleaned up.
* Check theStorage GroupsandMasking Viewssections again to ensure that web_host_1 is no longer listed and that the storage groups have been either deleted or modified as intended.
NEW QUESTION # 85
Which Open Replicator device type resides on the array running Open Replicator?
- A. Control
- B. Remote
- C. Donor
- D. Local
Answer: A
NEW QUESTION # 86
How does Solutions Enabler use Gatekeepers to pass commands to the PowerMax array?
- A. Automatically creates the Gatekeeper and locks the device Processes the system commands; unlocks and deletes the Gatekeeper.
- B. Obtains the Gatekeeper and locks the device. Processes the system commands and unlocks the device
- C. Automatically creates the Gatekeeper and unlocks the device. Processes the system commands; locks and deletes the Gatekeeper
- D. Obtains the Gatekeeper and unlocks the device Processes the system commands and locks the device.
Answer: B
NEW QUESTION # 87
A TimeFinder SnapVX snapshot of a Storage Group was created with a time-to-live setting of seven days Fourteen days after snapshot creation, a query shows that the snapshot still exists What is a possible reason for this issue?
- A. Snapshot has one or more linked targets
- B. Snapshot was not manually terminated
- C. Snapshot was created in NoCopy mode
- D. D. Reserved Capacity limit was exceeded
Answer: A
Explanation:
Step by Step Comprehensive Detailed Explanation:
TimeFinder SnapVX snapshots in PowerMax can be configured with a time-to-live (TTL) setting. This setting automatically deletes the snapshot after the specified time period has elapsed. However, there are certain situations where a snapshot might persist beyond its TTL:
* Linked Targets:If a snapshot has one or more linked targets associated with it, the snapshot will not be automatically deleted even if the TTL expires. This is because the linked targets depend on the snapshot for their data. The snapshot will remain available until all linked targets are deleted or unlinked.
Why other options are incorrect:
* B. Snapshot was not manually terminated:The TTL setting is designed to automatically delete the snapshot; manual termination is not required.
* C. Snapshot was created in NoCopy mode:The NoCopy mode affects how the snapshot is initially created, not its TTL behavior.
* D. Reserved Capacity limit was exceeded:The Reserved Capacity limit applies to the overall storage space used by snapshots, not the TTL of individual snapshots.
References and documents of Dell's public documentation for PowerMax Operate v.2:
* Dell Solutions Enabler 10.0.0 TimeFinder SnapVX CLI User Guide:This guide provides detailed information about SnapVX features and functionalities, including the time-to-live setting and how it interacts with linked targets. You can find this document on the Dell Support website by searching for
"Solutions Enabler TimeFinder SnapVX CLI User Guide."
NEW QUESTION # 88
What is the Deduplication Management Object (DMO) used for with PowerMax Deduplication?
- A. Stores and manages pointers between front-end devices and a single instance of data stored on disk
- B. Representation of data in a deduplication relationship
- C. Identifies identical data patterns based on the Hash ID
- D. Inline process using the same data reduction module as the Adaptive Compression Engine
Answer: A
NEW QUESTION # 89
Refer to the exhibit.
What is the topology shown1?
- A. SRDF/Star
- B. Cascaded SRDF
- C. SRDF/Metro
- D. Concurrent SRDF
Answer: B
Explanation:
Step by Step Comprehensive Detailed Explanation:
The topology shown in the exhibit depictsCascaded SRDF. This SRDF configuration involves three storage arrays (or sites) connected in a chained or cascaded manner.
Here's how it works:
* Primary Site (R1):The production host is connected to the primary storage array (R1).
* Intermediate Site (R2):The primary array (R1) synchronously replicates data to an intermediate array (R2).
* Remote Site (R2):The intermediate array (R2) then asynchronously replicates data to a remote array (also labeled R2 in the diagram).
This cascading setup provides a multi-hop disaster recovery solution, where data is first replicated synchronously to a nearby site for high availability and then asynchronously replicated to a further remote site for disaster recovery.
Why other options are incorrect:
* B. SRDF/Star:SRDF/Star involves a central array replicating to multiple remote arrays in a star-like pattern.
* C. SRDF/Metro:SRDF/Metro is designed for synchronous replication over short distances, typically within a metropolitan area.
* D. Concurrent SRDF:Concurrent SRDF allows multiple SRDF relationships to exist simultaneously for the same device.
References and documents of Dell's public documentation for PowerMax Operate v.2:
* Dell Solutions Enabler 10.0.0 SRDF Family CLI User Guide:This guide provides detailed information about different SRDF configurations, including Cascaded SRDF. You can find this document on the Dell Support website by searching for "Solutions Enabler SRDF Family CLI User Guide."
* Dell PowerMax Family: Essentials and Best Practices Guide:This guide offers a comprehensive overview of SRDF and its functionalities, including various topologies and use cases.
NEW QUESTION # 90
SRDF/A has been enabled between two PowerMax arrays. Due to a loss of all RDF links, the SRDF/A session has been placed in a Transmit Idle state.
What happens to the cycle switching and the queue depths?
- A. Cycle switching stops; Transmit queue depth increases
- B. Cycle switching stops; Transmit queue depth decreases
- C. Cycle switching continues; Transmit queue depth decreases
- D. Cycle switching continues; Transmit queue depth increases
Answer: A
NEW QUESTION # 91
A PowerMax administrator modified a Storage Group to add more volumes. The administrator then decides to use the Suitability Check to ensure compliance is met. The Suitability check runs but does not provide any information.
What is the likely cause for this issue?
- A. Volumes were added to the Storage Group before using the Suitability report
- B. Array has not been registered for performance data collection
- C. Steps were skipped in the Modify Storage Group setup before running the Suitability Check
- D. Suitability Check was run before the Storage Group was configured
Answer: C
NEW QUESTION # 92
What will prevent a LUN from being assigned to a second Storage Group?
- A. Storage Groups are already participating in a Masking View
- B. A LUN can only be assigned to one Storage Group
- C. Both Storage Groups have a service level assigned
- D. One of the Storage Groups is a child group
Answer: B
NEW QUESTION # 93
A systems administrator asks whether their host is supported for non-disruptive migration (NDM) between PowerMax arrays. The host they plan to migrate has one HBA and no multipathing software. What information should be provided to the administrator?
- A. Install Solutions Enabler on the host
- B. Upgrade to the latest host HBA driver version
- C. NDM is not supported for the host
- D. NDM is supported for the host
Answer: C
NEW QUESTION # 94
An SRDF/Metro pair was created with vWitness After a network outage, the administrator discovers that the SRDF pair is in an ActiveBias state What is the correct sequence of events to bring the SRDF pair into an ActiveActive state?
Answer:
Explanation:
NEW QUESTION # 95
On a PowerMax array, what is the default Dynamic I/O distribution mode setting when a Storage Group is associated with Host I/O Limits'?
- A. Always
- B. Never
- C. Balanced
- D. OnFailure
Answer: B
Explanation:
Host I/O Limits in PowerMax allow you to control the maximum IOPS (Input/Output Operations Per Second) or bandwidth that a storage group can consume. This helps prevent performance issues caused by one application or workload monopolizing resources.
When you associate Host I/O Limits with a Storage Group, the default Dynamic I/O distribution mode is set to Never.
* Never:This means that the I/O limits are statically distributed across the directors in the associated masking view. If a director fails, its allocated portion of the I/O limit is lost. This is the most conservative setting, as it ensures that the I/O limits are strictly enforced even in the event of a director failure.
You can change this setting toBalancedorAlwaysif you need more dynamic distribution of I/O limits.
References and documents of Dell's public documentation for PowerMax Operate v.2:
* Dell PowerMax and VMware vSphere Configuration Guide:This guide provides detailed information about Host I/O Limits, including the different distribution modes and their benefits. You can find this document on the Dell Support website by searching for "PowerMax and VMware vSphere Configuration Guide."
* Dell Solutions Enabler 10.0.0 CLI User Guide:This guide provides information on how to set Host I
/O Limits using SYMCLI commands, including the -dynamic option for specifying the distribution mode.
NEW QUESTION # 96
A company is setting up a multi-tenant environment where multiple departments share the same storage array with SID 1762. The IT department requires 2 TB of storage to be available on the ESXi1 host. Use
"ESXi1_SG" for the storage group name, create a port group with Dir- Ports "OR-1C:0 and OR-2C:0," and leave all other settings at their default.
Using the simulator, provision the storage required with a single volume using auto-provisioning groups.
Answer:
Explanation:
See the explanation for step by step solution.
Explanation:
We need to provision 2 TB of storage to the ESXi1 host on a PowerMax array (SID 1762) using Unisphere, in a multi-tenant environment. We'll use auto-provisioning with the following specifics:
* Storage Group Name:ESXi1_SG
* Port Group:(A new port group with Directors OR-1C:0 and OR-2C:0)
* Volume Size:2 TB (single volume)
* Other Settings:Default
Here are the step-by-step instructions, tailored for the Unisphere simulator as described in the question:
Steps:
1. Launch the Simulator and Navigate to Storage Groups
* Open Unisphere for PowerMax in your web browser.
* You should already be logged in to the simulator, with the PowerMax array with SID 1762.
* In the left-hand navigation pane, click onStorage>Storage Groups.
2. Initiate Storage Group Creation
* Click theCreatebutton (likely a plus "+" icon) in the Storage Groups section to start the Create Storage Group wizard.
3. Name the Storage Group
* In the "Create Storage Group" wizard:
* Storage Group Name:Enter ESXi1_SG.
* Enable FAST/Service Level:Do not check this option, as we are leaving all other settings at their default.
* ClickNextorContinue(the exact wording might vary).
4. Add Volumes
* Ensure"Create new volumes"is selected.
* Number of Volumes:Enter 1.
* Volume Size:
* Enter 2.
* Select TB from the dropdown for the unit.
* ClickNext.
5. Create the Port Group
* You should now be on the "Connectivity" or "Host" step, where you will add a new port group.
* Select "Create Port Group"
* Port Group Name:Give the new port group a name. You can use something descriptive like
"ESXi1_PG," or any name that follows your organization's naming conventions.
* Select Ports:
* Find and select the following Directors and ports from the list of available ports:
* OR-1C:0
* OR-2C:0
* Note:The simulator may not allow you to highlight the exact director ports as in a production environment. It will likely display all directors and ports under the selected array. Just ensure they are selected as part of the port group.
* ClickNext.
6. Add host to the Masking View
* Select "Add Host"
* Select "Create New Host"
* Host Name:ESXi1
* Initiators:You don't have specific initiators to add in this simulation, so you can skip this part or add any from the available options. This is because we are working within a simulated environment.
* ClickNext
7. Review and Create
* You'll be presented with a summary page that shows:
* Storage Group: ESXi1_SG
* Volume: 1 x 2 TB volume
* Port Group: (The new port group you created with OR-1C:0 and OR-2C:0)
* Host: ESXi1
* Carefully review all the settings to make sure they are correct.
* ClickRun NoworFinish(or similar wording) to create the storage group, volume, port group, and masking view.
8. Verification (Optional)
* After the operation completes, you can verify the results:
* Go back to theStorage Groupslist. You should see the ESXi1_SG storage group.
* Click on ESXi1_SG to view its details. You should see the 2 TB volume and the associated host (ESXi1) and port group.
* You can also navigate toHosts>Port Groupsto verify that the new port group was created correctly.
* Finally, you can navigate toHosts>Masking Viewsto verify that a masking view was created correctly.
NEW QUESTION # 97
Which units of measure are used to specify the size type when creating volumes in Unisphere?
- A. Cylinders, MB, GB, TB
- B. MB and GB only
- C. MB, TB, PB
- D. Cylinders, GB, TB. PB
Answer: D
NEW QUESTION # 98
What are two characteristics of a SnapVX Linked Target?
- A. They are read writable (R/W).
- B. They support a maximum of 1024 snaps per volume
- C. They can be made secure
- D. They cannot send data to SRDF
Answer: A,D
Explanation:
Step by Step Comprehensive Detailed Explanation:
* SnapVX Linked Targets:SnapVX is a snapshot technology used in Dell PowerMax storage arrays. A linked target is a volume that provides read/write access to a specific point-in-time copy (snapshot) of a source volume.
* Read/Write Access:Unlike traditional snapshots, which are typically read-only, SnapVX linked targets allow modifications. This makes them suitable for use cases like testing, development, and data analysis where changes need to be made to a copy of the data without affecting the original source.
* Secure Snapshots:SnapVX offers the capability to create "secure snapshots." These snapshots are write-protected and prevent any modifications or deletion, ensuring data integrity and protection against accidental or malicious changes.
Why other options are incorrect:
* B. They support a maximum of 1024 snaps per volume:This is partially correct. While a source volume can have up to 1024 snapshots, this limit includes all types of snapshots (manual, automated, and legacy), not just linked targets.
* B. They cannot send data to SRDF:This is incorrect. SnapVX linked targets can participate in SRDF (Symmetrix Remote Data Facility) replication, allowing for disaster recovery and data mobility.
References and documents of Dell's public documentation for PowerMax Operate v.2:
* Dell Solutions Enabler 10.0.0 TimeFinder SnapVX CLI User Guide:This guide provides detailed information about SnapVX features and commands, including how to create, link, and manage snapshots. It confirms the read/write capability of linked targets and the ability to create secure snapshots. You can find this document on the Dell Support website by searching for "Solutions Enabler TimeFinder SnapVX CLI User Guide."
* Dell PowerMax Family: Essentials and Best Practices Guide:This guide offers a comprehensive overview of PowerMax technologies, including SnapVX. It highlights the benefits of SnapVX linked targets for various use cases. You can find this document on the Dell Support website by searching for
"PowerMax Family Essentials and Best Practices Guide."
NEW QUESTION # 99
......
Instant Download D-PVM-OE-01 Dumps Q&As Provide PDF&Test Engine: https://www.itexamsimulator.com/D-PVM-OE-01-brain-dumps.html
Fast Exam Updates D-PVM-OE-01 dumps with PDF Test Engine Practice: https://drive.google.com/open?id=1hPEzAKhhDyBm7H_rXFAUv2HWvhxzFC3s
