Excellent C1000-026 Updated 2021 Dumps With 100% Exam Passing Guarantee
Best way to practice test for IBM C1000-026
NEW QUESTION 14
Which app should be used for monitoring QRadar performance and health?
- A. QRadar Performance Overview
- B. QRadar Deployment Intelligence
- C. QRadar Extension Management
- D. QRadar Monitoring Intelligence
Answer: B
Explanation:
Reference:
c_qapps_QDI_intro.html
NEW QUESTION 15
What is the minimum memory in gigabyte (GB) required for a QRadar All-in-One Virtual 3199 appliance?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
Explanation:
Reference:
c_qradar_ha_vrt_ap_reqs.html
NEW QUESTION 16
An administrator needs to develop advanced filters to retrieve information from the QRadar System pertaining to the top abnormal events of the most bandwidth-intensive IP addresses.
How can the administrator do this?
- A. Use the IBM DataStudio to create the query
- B. Build an AQL query using the QRadar Scratchpad
- C. Combine GROUP BY and ORDER BY clauses in a single query
- D. Build an AQL query using the QRadar GUI using Assets > Search Filter
Answer: C
Explanation:
Reference:
b_qradar_aql.pdf (21)
NEW QUESTION 17
Which event QID test is used to send an email as a rule response when disk usage reaches a threshold?
- A. (38750076) Disk Sentry Disk Usage Exceeded Warning threshold levels
- B. (38750076) Disk Sentry Disk Usage Exceeded Warn threshold
- C. (38750076) Disk Usage Exceeded Warn threshold
- D. (38750076) Disk Sentry Reached Warn threshold
Answer: A
Explanation:
Explanation/Reference: https://www.ibm.com/support/pages/qradar-configuring-qradar-remote-alerts-about-disk-usage
NEW QUESTION 18
An administrator enters the QRadar web console into a web browser but does not get a response.
Which process is responsible for the QRadar GUI?
- A. tomcat
- B. consoled
- C. guid
- D. magistrated
Answer: A
Explanation:
Reference:
https://www.ibm.com/support/pages/qradar-core-services-and-impact-when-restarted
NEW QUESTION 19
An administrator has reviewed the list of new features in the QRadar V7.3.2 release notes, and decides to upgrade their system to this version.
What is the minimum supported version that the administrator can upgrade from?
- A. 7.3.0
- B. 7.2.8
- C. 7.2.6
- D. 7.3.1
Answer: C
Explanation:
Reference:
https://www.ibm.com/support/pages/release-qradar-v732-sfs-73220190201201121
NEW QUESTION 20
Due to regulatory constraints, an administrator must increase the minimum password length and complexity.
In which QRadar section can the administrator change this setting?
- A. Admin / Security profiles
- B. Admin / Authentication
- C. Admin / Password policy
- D. Admin / System settings
Answer: C
Explanation:
Reference:
https://www.ibm.com/support/knowledgecenter/en/SSHLHV_5.4.0/com.ibm.alps.doc/tasks/ alps_configuring_admin_settings.htm
NEW QUESTION 21
An administrator plans to deploy multiple log sources that share a common configuration.
How many log sources can be added at one time?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
Explanation:
Reference:
https://www.ibm.com/support/knowledgecenter/SS42VS_DSM/com.ibm.dsm.doc/ t_logsource_bulkadd.html
NEW QUESTION 22
How many default dashboards does QRadar have?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
Explanation:
Reference:
c_qradar_customize_dboard.html
NEW QUESTION 23
An administrator needs to extract a property from an intrusion detection system (IDS) log. Using a regular expression, the administrator wants to extract a specific part of the log showing the matching "policy ID" of the IDS.
Which type of property must the administrator create?
- A. Normalized event property
- B. Custom event property
- C. Custom flow property
- D. Custom asset property
Answer: A
NEW QUESTION 24
To comply with specific regulations, an administrator has been requested to increase asset retention to 365 days.
In which QRadar section can the administrator find the asset retention settings?
- A. Assets Tab / Asset Retention
- B. Admin Tab / Asset Retention
- C. Admin Tab / System settings
- D. Assets Tab / Retention settings
Answer: C
Explanation:
Reference:
t_qradar_adm_asset_tuning_ip_retention.html
NEW QUESTION 25
An administrator needs to complete the upgrade process from V7.3.1 to V7.3.2.
What is the correct procedure?
- A. Copy the ISO file extension to the recommended directories and use this file
- B. Do a clean installation using the ISO file on a bootable USB device
- C. Copy the SFS file extension to the recommended directories and use this file
- D. Use the ISO file to execute the upgrade process
Answer: C
Explanation:
Reference:
https://www.ibm.com/support/knowledgecenter/SS42VS_7.3.2/com.ibm.qradar.doc/ t_qradar_up_ugrad_sys.html
NEW QUESTION 26
An administrator logs into the QRadar Console to review the stored backup files. There is an exclamation mark beside some files.
What is the cause of this?
- A. Canceled backup files
- B. Corrupted backup files
- C. Incomplete backup files
- D. Missing backup files
Answer: D
NEW QUESTION 27
An administrator needs to develop advanced filters to retrieve information from the QRadar System pertaining to the top abnormal events of the most bandwidth-intensive IP addresses.
How can the administrator do this?
- A. Use the IBM DataStudio to create the query
- B. Build an AQL query using the QRadar Scratchpad
- C. Combine GROUP BY and ORDER BY clauses in a single query
- D. Build an AQL query using the QRadar GUI using Assets > Search Filter
Answer: C
Explanation:
Explanation/Reference: https://www.ibm.com/support/knowledgecenter/SS42VS_7.3.1/com.ibm.qradar.doc/ b_qradar_aql.pdf (21)
NEW QUESTION 28
An administrator needs to save the nightly QRadar backups on a network storage.
The administrator has established the connection to the network storage.
What should the administrator do next?
- A. Change the Backup Repository Path to the network storage location using the System Settings window.
- B. Change the Backup Repository Path by adding a new Network Activity Rule.
- C. Configure the new network storage using the Assets Manager
- D. Change the Backup Repository Path to the network storage location using the Backup Recovery Configuration window.
Answer: D
Explanation:
Explanation/Reference: http://ftpmirror.your.org/pub/misc/ftp.software.ibm.com/software/security/products/qradar/ documents/7.2.8/en/b_qradar_admin_guide.pdf (146)
NEW QUESTION 29
An administrator has reviewed the list of new features in the QRadar V7.3.2 release notes, and decides to upgrade their system to this version.
What is the minimum supported version that the administrator can upgrade from?
- A. 7.3.0
- B. 7.2.8
- C. 7.2.6
- D. 7.3.1
Answer: C
NEW QUESTION 30
An administrator has been asked to configure a new QRadar console high availability (HA) deployment. Both the primary and secondary consoles have been installed with the QRadar software.
What should the administrator do to complete the HA configuration?
- A. Reinstall the QRadar software on the secondary console using an "HA Recovery Setup".
- B. Select "Secondary Host" on the wizard when adding the secondary host to the deployment.
- C. Add the secondary console to the deployment, and then create the HA host.
- D. Create the HA host to add the secondary console to the deployment.
Answer: C
Explanation:
Reference:
b_qradar_ha_guide.pdf
NEW QUESTION 31
Which of the following dashboards is a QRadar default Dashboard?
- A. Vulnerability Overview
- B. Threat and Security Monitoring
- C. Monitoring Overview
- D. Compliance and Reporting Monitoring
Answer: B
Explanation:
Reference:
c_qrm_default_dboard.html
NEW QUESTION 32
An administrator has been tasked to create a saved search that shows a list of multiple login failures for a single user by username. The administrator has done the following:
1. Selected Last Hour in the view option.
2. In the Add filter window, selected the search parameter Custom Rule [Indexed].
3. Selected Equals for Operator.
4. Selected Authentication for Rule Group.
What is the next step the administrator needs to perform for the Rule option?
- A. Select multiple login failures to the same destination
- B. Select login failures followed by success to the same username
- C. Select multiple login failures from the same source
- D. Select multiple login failures for a single username
Answer: D
NEW QUESTION 33
What is the minimum memory in gigabyte (GB) required for a QRadar All-in-One Virtual 3199 appliance?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
Explanation:
Reference:
https://www.ibm.com/support/knowledgecenter/en/SS42VS_7.3.1/com.ibm.qradar.doc/ c_qradar_ha_vrt_ap_reqs.html
NEW QUESTION 34
A company has two different domains in their IBM QRadar system: Domain_A and Domain_B. An administrator has been tasked to create a rule to look only at events that are tagged with Domain_A and ignore rules that are tagged with the other domains.
What domain text should the administrator use to create this rule?
- A. domain is one of: Domain_A
- B. from domain: Domain_A
- C. is from domain: Domain_A
- D. domain is: Domain_A
Answer: A
Explanation:
Explanation/Reference: https://www.ibm.com/support/knowledgecenter/en/SS42VS_7.3.1/com.ibm.qradar.doc/ c_domain_specific_rules_offenses.html
NEW QUESTION 35
A QRadar administrator added High Availability (HA) to the Event Processor and needs to verify the crossover link status between the primary and secondary hosts.
Which commands can be used to verify the crossover status? (Choose two.)
- A. /opt/qradar/ha/bin/getStatus crossover
- B. /opt/qradar/ha/bin/ha cstate
- C. cat /proc/drbd
- D. /opt/qradar/ha/bin/qradar_nettune.pl crossover status
- E. /opt/qradar/ha/bin/qradar_nettune.pl linkaggr <interface> status
- F. /opt/qradar/ha/bin/ha_getstate.sh
Answer: C,D
Explanation:
Reference:
https://www.ibm.com/developerworks/community/forums/html/topic?id=5c01c198-016d-461ba648-a87cdc445768
NEW QUESTION 36
An administrator has added a new Event Processor to a QRadar deployment.
How many events per second (EPS) are granted from the temporary license and how many days will those EPS last?
- A. 5000 EPS for a 35 day period
- B. 10000 EPS for a 35 day period
- C. 5000 EPS for a 45 day period
- D. 10000 EPS for a 45 day period
Answer: A
Explanation:
Reference:
https://www.ibm.com/support/knowledgecenter/en/SS42VS_7.3.0/com.ibm.qradar.doc/ c_qradar_adm_license_mgmt.html
NEW QUESTION 37
A company has several appliances and the administrator needs to copy a file to all appliances to run some tests to verify the integrity of the processes. The /opt/qradar/support/all_servers.sh script can be used to issue commands to all QRadar appliances within the deployment.
What option must be used with the script to copy the file to all appliances in the deployment?
- A. /opt/qradar/support/all_servers.sh -C
- B. /opt/qradar/support/all_servers.sh -p
- C. /opt/qradar/support/all_servers.sh -g
- D. /opt/qradar/support/all_servers.sh -k
Answer: B
NEW QUESTION 38
......
IBM Security QRadar SIEM V7.3.2 Fundamental Administration Certification Sample Questions and Practice Exam: https://www.itexamsimulator.com/C1000-026-brain-dumps.html
