[Feb-2022] SAP C_THR92_2105 DUMPS WITH REAL EXAM QUESTIONS
2022 New ITExamSimulator C_THR92_2105 PDF Recently Updated Questions
SAP C_THR92_2105 Certification Exam Topics:
| Topic Areas | Topic Details, Courses, Books |
|---|---|
| Provisioning Settings for Reporting 8% - 12% | Use Provisioning to configure table reports, canvas reports, and dashboard framework. |
| Report Consumers > 12% | Work with Report Consumers for sharing, distribution, permissions, and administration. |
| Tile-Based Dashboard Framework 8% - 12% | Configure tile-based dashboards including custom tiles, permissions, and administration. |
| Table Reports 8% - 12% | Create table reports. |
| Story Reports > 12% | Create story reports including queries with Query Designer. |
| Detailed Reporting Tool with Live Data 8% - 12% | Create queries and pivots on live data. |
NEW QUESTION 32
You want to create a query that shows only the current Job Information data for each employee.
On the Job Information table, which date type configurations can you use?
Note: There are 2 correct answers to this question.
- A. Date Range (On Start Date) with a date range from Today to Today
- B. As of Date with a dynamic date value of Today
- C. Current Date
- D. Show All
Answer: A,C
NEW QUESTION 33
You transferred a report to another instance.
Where can you start the validation of this report?
Note: There are 2 correct answers to this question.
- A. Report Center-> Edit the Report
- B. Report Distributor -> Validate
- C. Admin Center -> Report - Canvas Validation
- D. Admin Center -> Manage Report Center
Answer: B,C
NEW QUESTION 34
What are the steps to create and assign a date filter to a tile?
- A. 1. Enable the date filter in the tile.
2. Access Date Options.
3. Configure date type to Date Range.
4. Configure the date from/date to.
5. Configure end user free selection of date range. - B. 1. Access Date Options.
2. Configure the date type to Date Range.
3. Configure the date from/date to.
4. Enable the date filter in the tile.
5. Configure enduser free selection of date range. - C. 1. Create a new date range.
2. Configure the Name, label and date from/date to.
3. Enable the date filter in the tile.
4. Configure end user free selection of date range. - D. 1. Enable the date filter in the tile.
2. Create a new date range.
3. Configure the Name, label and date from/date to.
4. Configure end user free selection of date range.
Answer: B
NEW QUESTION 35
Why would you export report definitions?
Note: There are 2 correct answers to this question.
- A. To support report version control
- B. To move reports between company instances
- C. To schedule reports for offline execution
- D. To distribute reports to report consumers
Answer: B,D
NEW QUESTION 36
User A schedules a report in Report Center Scheduler.
What can user A achieve by enabling the Job Completion notification option for a scheduled job in the Report Center Scheduler?
- A. A notification appears for the recipient of the report on the home page after the report distribution process is complete.
- B. An e-mail is sentto the recipient of the report that the report distribution process is complete with the report.
- C. An e-mail is sent to user A after the report distribution process is complete.
- D. A notification appears for user A on the home page after the report distribution process is complete.
Answer: C
NEW QUESTION 37
You want to create a query that includes information about an employee's current job, as well as information such as name and date of birth.
How do you do this?
Note:There are 2 correct answers to this question.
- A. 1. Select Employment from the Category drop down.
2. Expand the Global Job Information table.
3. Select the applicable job-related fields from Global Job Information.
4. Navigate to and expand the User Category from within theEmployment category.
5. Expand the Employee Information table.
6. Select the applicable personal fields from the Employee Information table. - B. 1. Select User from the Category drop down.
2. Expand the Employee Information table.
3. Select the applicablepersonal fields from the Employee Information table.
4. Navigate to the Employment category from within User and expand.
5. Expand the Global Job Information table.
6. Select the applicable job-related fields from the Global Job Information table. - C. 1. Select Person from the Category drop down.
2. Expand the Personal Information table.
3. Select the applicable personal fields from the Personal Information table.
4. Navigate to and expand the Employment Category from within Person category.
5. Expand the Global Job Information table.
6. Select the applicable job-related fields from the Global Job Information table. - D. 1. Select Employment from the Category drop down.
2. Expand the Global Job Information table.
3. Select the applicable job-related fields from Global Job Information.
4. Navigate to and expand the Person Category from within the Employment category.
5. Expand the Personal Information table.
6. Select the applicable personal fields from the Personal Information table.
Answer: A,C
NEW QUESTION 38
A report shows one row for each language an employee speaks. The employee information "First name" and "Last name" is repeated for each language on each row.
Which format option allows you to display the employee information "First name" and "Last name" only once for each employee?
- A. Column Style Settings
- B. Sum Function
- C. Show Total Row
- D. Group Columns
Answer: D
NEW QUESTION 39
How can you give users permissions to see a tile?
- A. 1. Go to Admin Center.
2. Go to User Privileges -> Report Permissions.
3. Click Permissions.
4. Select Role.
5. Select ManagePermission Roles.
6. Enable Analytics Tiles and Dashboards. - B. 1. Go to Admin Center.
2. Select Role.
3. Click Permission.
4. Go to User Privileges -> Reports Permissions.
5. Enable Analytics Tiles andDashboards. - C. 1. Go to Admin Center.
2. Select User Privileges.
3. Select Role.
4. Enable Analytics Tiles and Dashboards. - D. 1. Go to Admin Center.
2. Select Manage Permission Roles.
3. Select Role.
4. Click Permission.
5. Go to User Privileges -> Reports Permissions.
6. Enable Analytics Tiles and Dashboards.
Answer: D
NEW QUESTION 40
When you format a list reportcomponent, which actions can you perform?
Note: There are 3 correct answers to this question.
- A. Save formats to a template.
- B. Change column types.
- C. Change column headers.
- D. Change the order of columns.
- E. Adjust column widths.
Answer: C,D,E
NEW QUESTION 41
Which tool can you useto create tiles offline?
- A. Detailed Reporting
- B. YouCalc Designer
- C. Advance Reporting
- D. Query Workspace
Answer: B
NEW QUESTION 42
You want to create a report thatreturns only employees who were born in 1961. You also want to enable the person who runs the report to specify a different birth year.
How can you achieve this?
Note: There are 2 correct answers to this question.
- A. 1. Select Date Options from the Toolbar.
2. Set Date Type to Date Range (On Start Date).
3. Set From date to 1/1/1961 and To date to 12/31/1961.
4. Set Use Custom Columns.
5. Select Date of Birth from Start Date Column.
6. Set Selectable At Runtime. - B. 1. Select Manage Query Filters.
2. Expand Personal Information table and select Dateof Birth.
3. Select Greater than or equal to from the operator list.
4. Set Custom filter date to 1/1/1961.
5. Select OK and then select Add.
6. Expand Personal Information table and select Date of Birth.
7. Select less than or equal to from the operator list.
8. Set Custom filter date to 12/31/1961.
9. Select OK. - C. 1. Select Date Options from the Toolbar.
2. Set Date Type to As of Date.
3. Set As of Date to 1/1/1961.
4. Set Use Custom Columns.
5. Select Date of Birth from Start Date Column.
6. Select Date of Birth from End Date Column.
7. Set Selectable At Runtime. - D. 1. Select Date Options from the Toolbar.
2. Set Date Type to Show All.
3. Select Manage Run Time Filters from the Toolbar.
4. Expand Personal Information table.
5. Select Date of Birth column.
6. Select OK.
Answer: A,B
NEW QUESTION 43
When using Report Center, what permissions are required to create a canvas report on Employee Profile data using the Detailed Reportingtool?
Note: There are 3 correct answers to this question.
- A. Create Reports: Employee Profile
- B. Run Report: Employee Profile
- C. Report Center
- D. Report - Canvas Designer
- E. Report - Canvas Designer Admin
Answer: C,D,E
NEW QUESTION 44
You create a report page and want to change the grid column width and grid row height. Where can you do this?
- A. Edit designer properties
- B. Validate page
- C. Edit Query
- D. Edit page properties
Answer: A
NEW QUESTION 45
User A schedules a report in Report Center Scheduler.
What can user A achieve by enabling the Job Completion notification option for a scheduled job in the Report Center Scheduler?
- A. A notification appears for the recipient of the report on the home page after the report distribution process is complete.
- B. An e-mail is sent to user A after the report distribution process is complete.
- C. A notification appears for user A on the home page after the report distribution process is complete.
- D. An e-mail is sent to the recipient of the report that the report distribution process is complete with the report.
Answer: B
NEW QUESTION 46
You want to create a tile-based dashboard and make it available to users. After you created and named thedashboard, which steps are required?
- A. 1. Select tile(s).
2. Select dataset.
3. Save dashboard. - B. 1. Create tiles(s).
2. Select filters.
3. Save dashboard. - C. 1. Create tile(s).
2. Select dataset.
3. Share dashboard. - D. 1. Select tile(s).
2. Save dashboard.
3. Share dashboard.
Answer: C
NEW QUESTION 47
What is the first step to make Ad Hoc reporting available for a customer?
- A. Enable Table reports in Admin Center-> Reporting & Analytics.
- B. Enable Table reports by assigning Role Based Permissions.
- C. Enable Ad Hoc report builder and domain schemas inProvisioning.
- D. Enable Table reports in Admin Center-> Upgrade Center.
Answer: C
NEW QUESTION 48
While constructing a dashboard, youfind that you need to create a tile that requires more complex configuration than what is available with the Online Tile Builder tool.
What tool can you use to create this tile?
- A. PDFSam
- B. YouCalc designer
- C. LMS Report Designer
- D. Business Intelligence Reporting Tool (BIRT)
Answer: B
NEW QUESTION 49
How do you give an analyst permission to build tiles?
- A. Assign the role-based permission in the Analytics RBP Category.
- B. Assign the role-based permission in the Manage Dashboards/Reports RBP Category.
- C. Add the analyst to the role-based permission group Dashboard Administrators.
- D. Assign the analyst asa dashboard administrator in Provisioning.
Answer: B
NEW QUESTION 50
What provisioning setting must you enable to allow customers to upload a custom BIRT template to a Table Report?
- A. Allow Bl Publisher template upload.
- B. Enable Visual Publisher.
- C. Additional Adhoc Sub domain Schemas Configuration.
- D. Enable Bl Publisher to BIRT Template Converter.
Answer: A
NEW QUESTION 51
You are creating a calculated column to calculate an employee's organizational tenure.
Why does the formula in the screenshot result in an error?
- A. An incorrect dynamic date variable has been used.
- B. The result of the formula is negative.
- C. An "if then else" statement needs to be included.
- D. An incorrect data type has been selected.
Answer: A
NEW QUESTION 52
Which permissions should you assign to allow a user to add a new story that will include Career Development Planning data?
Note: There are 2 correct answers to this question.
- A. Career Development Planning -> Data Access: Report - Story
- B. Career Development Planning -> Career Development Plan (CDP) Access Permission
- C. Report Permission -> Create Report - Story
- D. Report Permission -> Create Report
Answer: A,C
NEW QUESTION 53
An administrator creates a new MDF object forstoring attachments related to an employees' dependents. After uploading some test data, the administrator states they are unable to report on the new data with Advanced Reporting tool in a canvas report. The administrator is working for a client that hasalready had their system transitioned to Workforce Analytics on SAP HANA.
How can the administrator quickly make the data available for reporting?
- A. Use Refresh Analytics Permissions Tool.
- B. Request a Metadata Refresh from SuccessFactors Support.
- C. Use Purge Advanced Reporting Metadata Cache Tool.
- D. Use WFA on HANA Data Factory to rebuild the cube.
Answer: A
NEW QUESTION 54
The data source used by the two tables only displays current (active) employees.
How would you configure a filter on the table End of Previous Year Headcount by Location to display data accurately?
Note: There are 2 correct answers to this question.
- A. Set the Range type to Standard
- B. Set the Range type to Offset
- C. Set a filter on Hire Date (Member)
- D. Set a filter on Hire Date (Range)
Answer: B,D
NEW QUESTION 55
You want to create a page in a canvas report that includes a custom image, a user editable title centeredunderneath the image, and the current date in the top-right corner.
Which combinations of components can you use to accomplish this?
Note: There are 2 correct answers to this question.
- A. 1 custom image component, 1 simple text component
- B. 1 custom image component, 1 rich text component
- C. 1 custom image component, 2 rich text components
- D. 1 custom image component, 1 rich text component, 1 simple text component
Answer: C,D
NEW QUESTION 56
......
Latest C_THR92_2105 Pass Guaranteed Exam Dumps Certification Sample Questions: https://www.itexamsimulator.com/C_THR92_2105-brain-dumps.html
