[Feb-2024] Fortinet NSE7_PBC-7.2 Official Cert Guide PDF
Exam NSE7_PBC-7.2: Fortinet NSE 7 - Public Cloud Security 7.2 - ITExamSimulator
NEW QUESTION # 21
Which two Amazon Web Services (AWS) features support east-west traffic inspection within the AWS cloud by the FortiGate VM? (Choose two.)
- A. A NAT gateway with an EIP
- B. A transit gateway with an attachment
- C. A transit VPC
- D. An Internet gateway with an EIP
Answer: B,C
Explanation:
Explanation
The correct answer is B and D. A transit gateway with an attachment and a transit VPC support east-west traffic inspection within the AWS cloud by the FortiGate VM.
According to the Fortinet documentation for Public Cloud Security, a transit gateway is a network transit hub that connects VPCs and on-premises networks. A transit gateway attachment is a resource that connects a VPC or VPN to a transit gateway.By using a transit gateway with an attachment, you can route traffic from your spoke VPCs to your security VPC, where the FortiGate VM can inspect the traffic1.
A transit VPC is a VPC that serves as a global network transit center for connecting multiple VPCs, remote networks, and virtual private networks (VPNs).By using a transit VPC, you can deploy the FortiGate VM as a virtual appliance that provides network security and threat prevention for your VPCs2.
The other options are incorrect because:
A NAT gateway with an EIP is a service that enables instances in a private subnet to connect to the internet or other AWS services, but prevents the internet from initiating a connection with those instances.A NAT gateway with an EIP does not support east-west traffic inspection within the AWS cloud by the FortiGate VM3.
An Internet gateway with an EIP is a horizontally scaled, redundant, and highly available VPC component that allows communication between instances in your VPC and the internet.An Internet gateway with an EIP does not support east-west traffic inspection within the AWS cloud by the FortiGate VM4.
1:Fortinet Documentation Library - Deploying FortiGate VMs on AWS2: [Fortinet Documentation Library - Transit VPC on AWS]3: [NAT Gateways - Amazon Virtual Private Cloud]4: [Internet Gateways - Amazon Virtual Private Cloud]
NEW QUESTION # 22
Refer to the exhibit
Consider the active-active load balance sandwich scenario in Microsoft Azure.
What are two important facts in the active-active load balance sandwich scenario? (Choose two )
- A. It is recommended to enable NAT on FortiGate policies.
- B. It uses the vdom-exception command to exclude the configuration from being synced
- C. It uses the FGCP protocol
- D. It supports session synchronization for handling asynchronous traffic.
Answer: A,D
Explanation:
Explanation
B: It is recommended to enable NAT on FortiGate policies. This is because the Azure load balancer uses a hash-based algorithm to distribute traffic to the FortiGate instances, and it relies on the source and destination IP addresses and ports of the packets1. If NAT is not enabled, the source IP address of the packets will be the same as the load balancer's frontend IP address, which will result in uneven distribution of traffic and possible asymmetric routing issues1. Therefore, it is recommended to enable NAT on the FortiGate policies to preserve the original source IP address of the packets and ensure optimal load balancing and routing1. D. It supports session synchronization for handling asynchronous traffic. This means that the FortiGate instances can synchronize their session tables with each other, so that they can handle traffic that does not follow the same path as the initial packet of a session2. For example, if a TCP SYN packet is sent to FortiGate A, but the TCP SYN-ACK packet is sent to FortiGate B, FortiGate B can forward the packet to FortiGate A by looking up the session table2. This feature allows the FortiGate instances to handle asymmetric traffic that may occur due to the Azure load balancer's hash-based algorithm or other factors.
The other options are incorrect because:
It does not use the vdom-exception command to exclude the configuration from being synced. The vdom-exception command is used to exclude certain configuration settings from being synchronized between FortiGate devices in a cluster or a high availability group3. However, in this scenario, the FortiGate devices are not in a cluster or a high availability group, but they are standalone devices with standalone configuration synchronization enabled. This feature allows them to synchronize most of their configuration settings with each other, except for some settings that identify the FortiGate to the network, such as the hostname.
It does not use the FGCP protocol. FGCP stands for FortiGate Clustering Protocol, which is used to synchronize configuration and state information between FortiGate devices in a cluster or a high availability group. However, in this scenario, the FortiGate devices are not in a cluster or a high availability group, and they use standalone configuration synchronization instead of FGCP.
NEW QUESTION # 23
Refer to the exhibit.
You are troubleshooting a FortiGate HA floating IP issue with Microsoft Azure. After the failover, the new primary device does not have the previous primary device floating IP address.
What could be the possible issue With this scenario?
- A. A wrong client secret credential is used
- B. The error is caused by credential time expiration.
- C. FortiGate port4 does not have internet access.
- D. The Azure service principle account must have a contributor role.
Answer: D
Explanation:
Explanation
In this scenario, the issue is caused by the Azure service principle account nothaving a contributor role. This is required for the FortiGate HA floating IP to work properly. Without this role, the new primary device will not have the previous primary device floating IP address after failover. References: Fortinet Public Cloud Security knowledge source documents or study guide.
https://docs.fortinet.com/product/fortigate-public-cloud/7.2
NEW QUESTION # 24
A Network security administrator is searching for a solution to secure traffic going in and out of the container infrastructure.
In which two ways can Fortinet container security help secure container infrastructure?(Choose two.)
- A. FortiGate NGFW can connect to the worker node and protects the container-
- B. FortiGate NGFW and FortiSandbox can be used to secure container traffic
- C. FortiGate NGFW can inspect north-south container traffic with label aware policies
- D. FortiGate NGFW can be placed between each application container for north-south traffic inspection
Answer: B,C
Explanation:
Explanation
The correct answer is C and D. FortiGate NGFW can inspect north-south container traffic with label aware policies and FortiGate NGFW and FortiSandbox can be used to secure container traffic.
According to the Fortinet documentation for container security1, FortiGate NGFW can provide the following benefits for securing container infrastructure:
It can inspect north-south traffic between containers and external networks using label aware policies, which allow for dynamic policy enforcement based on Kubernetes labels and metadata.
It can integrate with FortiSandbox to provide advanced threat protection for container traffic, by sending suspicious files or URLs to a cloud-based sandbox for analysis and detection.
It can leverage FortiGuard Security Services to provide real-time threat intelligence and updates for container traffic, such as antivirus, web filtering, IPS, and application control.
The other options are incorrect because:
FortiGate NGFW cannot be placed between each application container for north-south traffic inspection, as this would create unnecessary complexity and overhead. Instead, FortiGate NGFW can be deployed at the edge of the container network or as a sidecar proxy to inspect traffic at the ingress and egress points.
FortiGate NGFW cannot connect to the worker node and protect the container, as this would not provide sufficient visibility and control over the container traffic. Instead, FortiGate NGFW can leverage the native Kubernetes APIs and services to monitor and secure the container traffic.
1:Fortinet Documentation Library - Container Security
NEW QUESTION # 25
You are troubleshooting an Azure SDN connectivity issue with your FortiGate VM Which two queries does that SDN connector use to interact with the Azure management API? (Choose two.)
- A. The first query is targeted to IP address 8.8
- B. The first query is targeted to a special IP address to get a token.
- C. Some queries are made to manage public IP addresses.
- D. There is only one query initiating from FortiGate port1 -
Answer: B,C
Explanation:
Explanation
The Azure SDN connector uses two types of queries to interact with the Azure management API. The first query is targeted to a special IP address to get a token. This token is used to authenticate the subsequent queries. The second type of query is used to retrieve information about the Azure resources, such as virtual machines, network interfaces, network security groups, and public IP addresses. Some queries are made to manage public IP addresses, such as assigning or releasing them from the FortiGate VM. References: Configuring an SDN connector in Azure, Azure SDN connector using service principal, Troubleshooting Azure SDN connector
NEW QUESTION # 26
You are adding more spoke VPCs to an existing hub and spoke topology Your goal is to finish this task in the minimum amount of time without making errors.
Which Amazon AWS services must you subscribe to accomplish your goal?
- A. CloudWatch, S3
- B. GuardDuty, CloudWatch
- C. Inspector, S3
- D. WAF, DynamoDB
Answer: A
Explanation:
Explanation
The correct answer is D. CloudWatch and S3.
According to the GitHub repository for the Fortinet aws-lambda-tgw script1, this function requires the following AWS services:
CloudWatch: A monitoring and observability service that collects and processes events from various AWS resources, including Transit Gateway attachments and route tables.
S3: A scalable object storage service that can store the configuration files and logs generated by the Lambda function.
By using the Fortinet aws-lambda-tgw script, you can automate the creation and configuration of Transit Gateway Connect attachments for your FortiGate devices.This can help you save time and avoid errors when adding more spoke VPCs to an existing hub and spoke topology1.
The other AWS services mentioned in the options are not required for this task. GuardDuty is a threat detection service that monitors for malicious and unauthorized behavior to help protect AWS accounts and workloads. WAF is a web application firewall that helps protect web applications from common web exploits.
Inspector is a security assessment service that helps improve the security and compliance of applications deployed on AWS. DynamoDB is a fast and flexible NoSQL database service that can store various types of data.
1:GitHub - fortinet/aws-lambda-tgw
NEW QUESTION # 27
When adding the Amazon Web Services (AWS) account to the FortiCNP, which three mandatory configuration steps must you follow? (Choose three.)
- A. Accept FortiCNP to create CloudTrail for the account
- B. Enable cloud protection through AWS Guard Duty and AWS Inspector
- C. Add AWS accounts through FortiCNP.
- D. Enable cross-reg Ion aggregation
- E. Launch the CloudFormation template.
Answer: A,C,E
Explanation:
Explanation
When adding the Amazon Web Services (AWS) account to the FortiCNP, you must follow these three mandatory configuration steps:
Add AWS accounts through FortiCNP. This is the first step to enable cloud protection for your AWS account. You can add one or multiple accounts automatically or manually. You need to provide the AWS account ID and a name for the account. You also need to select the optional permissions to be granted to FortiCNP as needed1.
Accept FortiCNP to create CloudTrail for the account. This is required for FortiCNP to collect and analyze the AWS API calls and events. You can choose to let FortiCNP create a CloudTrail for the account or use an existing one. You also need to specify the aggregation region for the CloudTrail1.
Launch the CloudFormation template. This is required for FortiCNP to create a stack and a role in your AWS account. The stack contains the resources that FortiCNP needs to access and monitor your AWS account. The role allows FortiCNP to assume it and perform actions on your behalf. You need to enter a custom or default role name and a unique UUID that is designated for your company on FortiCNP1.
References: Add AWS Account Automatically
https://docs.fortinet.com/document/forticnp/22.4.a/online-help/246021/add-aws-account-automatically
NEW QUESTION # 28
Refer to the exhibit
You are tasked to deploy a FortiGate VM with private and public subnets in Amazon Web Services (AWS).
You examined the variables.tf file.
What will be the final result after running the terraform init and terraform apply commands?
- A. Terraform will not deploy a FortiGate VM
- B. Terraform will deploy a FortiGate VM in the eu-West-1a region with two subnets and byol license.
- C. Terraform will deploy a FortiGate VM in the eu-West-Ia region with private and public subnets.
- D. Terraform will deploy a FortiGate VM in the eu-West-Ia region without any subnets.
Answer: C
Explanation:
Explanation
The variables.tf file shows that the FortiGate VM will be deployed in the eu-West-Ia region with private and public subnets. The region variable is set to "eu-west-1" and the availability_zone variable is set to
"eu-west-1a". The vpc_id variable is set to "vpc-0e9d6a6f" and the subnets variable is set to a list of two subnet IDs: "subnet-0f9d6a6f" and "subnet-1f9d6a6f". The license_type variable is set to "on-demand" and the ami_id variable is set to "ami-0e9d6a6f".
References:
https://docs.fortinet.com/document/fortigate/6.4.0/aws-cookbook/236478/deploying-fortigate-vm-on-aws-using-t
NEW QUESTION # 29
Refer to the exhibit
The exhibit shows a customer deployment of two Linux instances and their main routing table in Amazon Web Services (AWS). The customer also created a Transit Gateway (TGW) and two attachments Which two steps are required to route traffic from Linux instances to the TGWQ (Choose two.)
- A. In the main subnet routing table in VPC A and B, add a new route with destination 0_0.0.0/0, next hop Internet gateway(IGW).
- B. In the main subnet routing table in VPC A and B, add a new route with destination 0_0.0.0/0, next hop TGW.
- C. In the TGW route table, add route propagation to 192.168.0 0/16
- D. In the TGW route table, associate two attachments.
Answer: B,D
Explanation:
Explanation
According to the AWS documentation for Transit Gateway, a Transit Gateway is a network transit hub that connects VPCs and on-premises networks. To route traffic from Linux instances to the TGW, you need to do the following steps:
In the TGW route table, associate two attachments. An attachment is a resource that connects a VPC or VPN to a Transit Gateway. By associating the attachments to the TGW route table, you enable the TGW to route traffic between the VPCs and the VPN.
In the main subnet routing table in VPC A and B, add a new route with destination 0_0.0.0/0, next hop TGW. This route directs all traffic from the Linux instances to the TGW, which can then forward it to the appropriate destination based on the TGW route table.
The other options are incorrect because:
In the TGW route table, adding route propagation to 192.168.0 0/16 is not necessary, as this is already the default route for the TGW. Route propagation allows you to automatically propagate routes from your VPC or VPN to your TGW route table.
In the main subnet routing table in VPC A and B, adding a new route with destination 0_0.0.0/0, next hop Internet gateway (IGW) is not correct, as this would bypass the TGW and send all traffic directly to the internet. An IGW is a VPC component that enables communication between instances in your VPC and the internet.
[Transit Gateways - Amazon Virtual Private Cloud]
NEW QUESTION # 30
You are automating configuration changes on one of the FortiGate VMS using Linux Red Hat Ansible.
How does Linux Red Hat Ansible connect to FortiGate to make the configuration change?
- A. It uses an API.
- B. It uses a FortiGate internal or external IP address with TCP port 21
- C. It uses YAML
- D. It uses SSH as a connection method to FortiOS.
Answer: A
Explanation:
Explanation
Ansible connects to FortiGate using an API, which is a method of communication between different software components. Ansible uses the fortios_* modules to interact with the FortiOS API, which is a RESTful API that allows configuration and monitoring of FortiGate devices12. Ansible can use either HTTP or HTTPS as the transport protocol, and can authenticate with either a username and password or an API token3.
The other options are incorrect because:
Ansible does not use TCP port 21 to connect to FortiGate. Port 21 is typically used for FTP, which is not supported by FortiOS4.
Ansible does not use SSH as a connection method to FortiOS. SSH is a secure shell protocol that allows remote command execution and file transfer, but it is not the preferred way of automating configuration changes on FortiGate devices.
Ansible does not use YAML to connect to FortiGate. YAML is a data serialization language that Ansible uses to write playbooks and inventory files, but it is not a connection method. References:
Fortinet.Fortios - Ansible Documentation
FortiOS REST API Reference
FortiOS Module Guide - Ansible Documentation
FortiOS 7.0 CLI Reference
[Connection methods and details - Ansible Documentation]
[YAML Syntax - Ansible Documentation]
NEW QUESTION # 31
Which statement about Transit Gateway (TGW) in Amazon Web Services (AWS) is true?
- A. The TGW default route table cannot be disabled.
- B. TGW can have multiple TGW route tables.
- C. Both the TGW attachment and propagation must be in the same TGW route table
- D. A TGW attachment can be associated with multiple TGW route tables.
Answer: B
Explanation:
Explanation
According to the AWS documentation for Transit Gateway, a transit gateway is a network transit hub that connects VPCs and on-premises networks. A transit gateway route table is a set of rules that determines how traffic is routed among the attachments to the transit gateway1.
A transit gateway can have multiple route tables, and you can associate different attachments with different route tables. This allows you to control how traffic is routed between your VPCs and VPNs based on your network design and security requirements1.
The other options are incorrect because:
Both the TGW attachment and propagation must be in the same TGW route table is not true. You can associate an attachment with one route table and enable propagation from another attachment to a different route table. This allows you to separate the routing domains for your attachments1.
A TGW attachment can be associated with multiple TGW route tables is not true. You can only associate an attachment with one route table at a time. However, you can change the association at any time1.
The TGW default route table cannot be disabled is not true. You can disable the default route table by deleting all associations and propagations from it. However, you cannot delete the default route table itself1.
1: Transit Gateways - Amazon Virtual Private Cloud
NEW QUESTION # 32
Your administrator instructed you to deploy an Azure vWAN solution to create a connection between the main company site and branch sites to the other company VNETs.
What are the two best connection solutions available between your company headquarters, branch sites, and the Azure vWAN hub? (Choose two.)
- A. An L2TP connection
- B. SSL VPN connections
- C. VPN Gateway
- D. GRE tunnels
- E. ExpressRoute
Answer: C,E
Explanation:
Explanation
The two best connection solutions available between your company headquarters, branch sites, and the Azure vWAN hub are A. ExpressRoute and E. VPN Gateway.
According to the Azure documentation for Virtual WAN, ExpressRoute and VPN Gateway are two of the supported connectivity options for connecting your on-premises sites and Azure virtual networks to the Azure vWAN hub1. These options provide secure, reliable, and high-performance connectivity for your network traffic.
ExpressRoute is a service that lets you create private connections between your on-premises sites and Azure.ExpressRoute connections do not go over the public internet, and offer more reliability, faster speeds, lower latencies, and higher security than typical connections over the internet2.
VPN Gateway is a service that lets you create encrypted connections between your on-premises sites and Azure over the internet using IPsec/IKE protocols.VPN Gateway also supports point-to-site VPN connections for individual clients using OpenVPN or IKEv2 protocols3.
The other options are incorrect because:
GRE tunnels are not a supported connectivity option for Azure vWAN. GRE is a protocol that encapsulates packets for tunneling purposes.GRE tunnels are established between the connect attachment and your appliance in Azure vWAN4.
SSL VPN connections are not a supported connectivity option for Azure vWAN. SSL VPN is a type of VPN that uses the Secure Sockets Layer (SSL) protocol to secure the connection between a client and a server.SSL VPN is not compatible with the Azure vWAN hub5.
An L2TP connection is not a supported connectivity option for Azure vWAN. L2TP is a protocol that creates a tunnel between two endpoints at the data link layer (Layer 2) of the OSI model.L2TP is not compatible with the Azure vWAN hub.
1:Azure Virtual WAN Overview | Microsoft Learn2: [ExpressRoute overview - Azure ExpressRoute | Microsoft Docs]3: [VPN Gateway - Virtual Networks | Microsoft Azure]4: [Transit Gateway Connect - Amazon Virtual Private Cloud]5: [SSL VPN - Wikipedia] : [Layer 2 Tunneling Protocol - Wikipedia]
NEW QUESTION # 33
Refer to the exhibit
A customer has deployed an environment in Amazon Web Services (AWS) and is now trying to send outbound traffic from the Linux1 and Linux2 instances to the internet through the security VPC (virtual private cloud). The FortiGate policies are configured to allow all outbound traffic; however, the traffic is not reaching the FortiGate internal interface. Assume there are no issues with the Transit Gateway (TGW) configuration Which two settings must the customer add to correct the issue? (Choose two.)
- A. Both landing subnets in the security VPC must have a 0.0.0.0/0 traffic route to the FortiGate port2.
- B. The four landing subnets in all the VPCs must have a 0.0 0 0/0 traffic route to the TGW
- C. Both landing subnets in the spoke VPCs must have a 0.0.0.0/0 traffic route to the Internet Gateway (IOW).
- D. Both landing subnets in the spoke VPCs must have a 0.0 00/0 traffic route to the TGW
Answer: A,D
Explanation:
Explanation
The correct answer is B and C. Both landing subnets in the spoke VPCs must have a 0.0.0.0/0 traffic route to the TGW. Both landing subnets in the security VPC must have a 0.0.0.0/0 traffic route to the FortiGate port2.
According to the AWS documentation for Transit Gateway, a transit gateway is a network transit hub that connects VPCs and on-premises networks. To send outbound traffic from the Linux instances to the internet through the security VPC, you need to do the following steps:
In the main subnet routing table in the spoke VPCs, add a new route with destination 0.0.0.0/0, next hop TGW. This route directs all traffic from the Linux instances to the TGW, which can then forward it to the appropriate destination based on the TGW route table.
In the main subnet routing table in the security VPC, add a new route with destination 0.0.0.0/0, next hop FortiGate port2. This route directs all traffic from the TGW to the FortiGate internal interface, where it can be inspected and allowed by the FortiGate policies.
The other options are incorrect because:
Adding a 0.0.0.0/0 traffic route to the Internet Gateway (IGW) in the spoke VPCs is not correct, as this would bypass the TGW and the security VPC and send all traffic directly to the internet.
Adding a 0.0.0.0/0 traffic route to the TGW in all the VPCs is not necessary, as only the spoke VPCs need to send traffic to the TGW. The security VPC needs to send traffic to the FortiGate port2.
Transit Gateways - Amazon Virtual Private Cloud:Fortinet Documentation Library - Deploying FortiGate VMs on AWS
NEW QUESTION # 34
Refer to the exhibit
You are tasked with deploying a webserver and FortiGate VMS in AWS_ You are using Terraform to automate the process Which two important details should you know about the Terraform files? (Choose two.)
- A. The subnet_private 1 value is defined in the variables . tf file
- B. After the deployment, Terraform output values are visible only through AWS CloudShell.
- C. You must specify all the AWS credentials in the output. of file.
- D. All the output values are available after a successful terraform apply command
Answer: A,D
Explanation:
Explanation
A: All the output values are available after a successful terraform apply command. This means that after the deployment, you can view the output values by running terraform output or terraform show in the same directory where you ran terraform apply1. You can also use the output values in other Terraform configurations or external systems by using the terraform output command with various options2. B. The subnet_private_1 value is defined in the variables.tf file. This means that the subnet_private_1 value is an input variable that can be customized by passing a different value when running terraform apply or by setting an environment variable3. The variables.tf file is where you declare all the input variables for your Terraform configuration4.
The other options are incorrect because:
After the deployment, Terraform output values are not visible only through AWS CloudShell. You can access them from any shell or terminal where you have Terraform installed and configured with your AWS credentials.
You do not need to specify all the AWS credentials in the output.tf file. The output.tf file is where you declare all the output values for your Terraform configuration4. You can specify your AWS credentials in a separate file, such as provider.tf, or use environment variables or shared credentials files. References:
Output Values - Configuration Language | Terraform - HashiCorp Developer Command: output - Terraform by HashiCorp Input Variables - Configuration Language | Terraform - HashiCorp Developer Configuration Language | Terraform - HashiCorp Developer
NEW QUESTION # 35
Which statement about Transit Gateway (TGW) in Amazon Web Services (AWS) is true?
- A. The TGW default route table cannot be disabled.
- B. TGW can have multiple TGW route tables.
- C. Both the TGW attachment and propagation must be in the same TGW route table
- D. A TGW attachment can be associated with multiple TGW route tables.
Answer: B
Explanation:
Explanation
According to the AWS documentation for Transit Gateway, a transit gateway is a network transit hub that connects VPCs and on-premises networks. A transit gateway route table is a set of rules that determines how traffic is routed among the attachments to the transit gateway1.
A transit gateway can have multiple route tables, and you can associate different attachments with different route tables. This allows you to control how traffic is routed between your VPCs and VPNs based on your network design and security requirements1.
The other options are incorrect because:
Both the TGW attachment and propagation must be in the same TGW route table is not true. You can associate an attachment with one route table and enable propagation from another attachment to a different route table. This allows you to separate the routing domains for your attachments1.
A TGW attachment can be associated with multiple TGW route tables is not true. You can only associate an attachment with one route table at a time. However, you can change the association at any time1.
The TGW default route table cannot be disabled is not true. You can disable the default route table by deleting all associations and propagations from it. However, you cannot delete the default route table itself1.
1: Transit Gateways - Amazon Virtual Private Cloud
NEW QUESTION # 36
Refer to the exhibit
You are deploying two FortiGate VMS in HA active-passive mode with load balancers in Microsoft Azure Which two statements are true in this load balancing scenario? (Choose two.)
- A. An internal load balancer listener is the next-hop for outgoing traffic.
- B. A dedicated management interface can be used for load balancing.
- C. You must add a route to the Microsoft VIP used for the health check.
- D. The FortiGate public IP is the next-hop for all the traffic.
Answer: A,B
Explanation:
A is incorrect because the FortiGate public IP is not the next-hop for all the traffic. The FortiGate public IP is only used for incoming traffic from the internet. The Azure load balancer distributes the incoming traffic to the active FortiGate VM based on a health probe123. The FortiGate public IP is not used for outgoing traffic or internal traffic.
B is correct because an internal load balancer listener is the next-hop for outgoing traffic. The internal load balancer listener is configured with a floating IP address that is assigned to the active FortiGate VM. The internal load balancer listener also has a health probe to monitor the status of the FortiGate VMs123. The internal load balancer listener forwards the outgoing traffic to the internet through the public load balancer.
C is incorrect because you do not need to add a route to the Microsoft VIP used for the health check. The Microsoft VIP is an internal IP address that is used by the Azure load balancer to send health probes to the FortiGate VMs123. The Microsoft VIP is not reachable from outside the Azure network and does not require any routing configuration on the FortiGate VMs.
D is correct because a dedicated management interface can be used for load balancing. In this deployment, port4 is used as a dedicated management interface that connects to the management network3. The dedicated management interface can be used to access the FortiGate VMs for configuration and monitoring purposes. The dedicated management interface can also be used to synchronize the configuration and session information between the primary and secondary devices in an HA cluster2.
NEW QUESTION # 37
......
Free NSE7_PBC-7.2 Exam Dumps to Improve Exam Score: https://www.itexamsimulator.com/NSE7_PBC-7.2-brain-dumps.html
2024 Realistic NSE7_PBC-7.2 Dumps Exam Tips Test Pdf Exam Materials: https://drive.google.com/open?id=1kHiHScUKNATX27stojZsSncOmkCMbwp4
