Juniper JN0-635 Real 2021 Braindumps Mock Exam Dumps
JN0-635 Exam Questions | Real JN0-635 Practice Dumps
Important Details to Know about JN0-635 Certification Test
The content covered by this JN0-635 exam is provided through recommended tutor-conducted courses and other comprehensive resources. You can obtain more information about this in the up and coming sections of this article. Also, you need to have the JNCIS-SEC certification as a prerequisite for the JNCIP-SEC certificate. To register for JN0-635 exam, create an account with Pearson VUE. You can choose a test center of your choice and then select JN0-635 in the list of tests. If you have already taken Juniper Networks evaluations before, you can register with your existing CertManager ID.
Juniper JN0-635 Exam Topics:
| Section | Objectives |
|---|---|
| Firewall Filters | Describe the concepts, operation, or functionality of firewall filters and ACLs
Given a scenario, demonstrate how to configure, troubleshoot, or monitor firewall filters |
| Compliance | Describe the concepts or operation of security compliance
|
| Threat Mitigation | Describe the concepts, operation, or functionality of threat mitigation
Given a scenario, demonstrate how to configure or monitor threat mitigation |
| Edge Security | Describe the concepts, operation, or functionality of edge security features
|
| Layer 2 Security | Describe the concepts, operation, or functionality of Layer 2 security
Given a scenario, demonstrate how to configure or monitor Layer 2 security |
| Advanced Threat Protection | Describe the concepts, operation, or functionality of Juniper ATP
Given a scenario, demonstrate how to configure or monitor Juniper ATP |
| Troubleshooting Security Policy and Zones | Given a scenario, demonstrate how to troubleshoot or monitor security policies or security zones
|
| Advanced IPsec | Describe the concepts, operation, or functionality of advanced IPsec application
Given a scenario, demonstrate how to configure, troubleshoot, or monitor advanced IPsec functionality |
| Logical and Tenant Systems | Describe the concepts, operation, or functionality of the logical systems
Describe the concepts, operation, or functionality of the tenant systems
|
| Advanced Network Address Translation | Describe the concepts, operation, or functionality of advanced NAT functionality
Given a scenario, demonstrate how to configure, troubleshoot, or monitor advanced NAT scenarios |
NEW QUESTION 30
Click the Exhibit button.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. SRX Series devices will not block traffic based on this third-party feed
- B. Events based on this third-party feed will not affect a host's threat score
- C. SRX Series devices will block traffic based on this third-party feed
- D. Events based on this third-party feed will affect a host's threat score
Answer: B,C
NEW QUESTION 31
Click the Exhibit button.
Which type of NAT is shown in the exhibit?
- A. persistent NAT
- B. NAT46
- C. NAT64
- D. DS-Lite
Answer: C
NEW QUESTION 32
Click the Exhibit button.
Referring to the exhibit, which statement is true?
- A. Destination NAT is occurring
- B. Source NAT without PAT is occurring
- C. Source NAT with PAT is occurring
- D. Static NAT without PAT is occurring
Answer: C
NEW QUESTION 33
Click the Exhibit button.
When attempting to enroll an SRX Series device to JATP, you receive the error shown in the exhibit.
What is the cause of the error?
- A. The SRX Series device certificate does not match the JATP certificate
- B. The SRX Series device does not have an IP address assigned to the interface that accesses JATP
- C. The fxp0 IP address is not routable
- D. A firewall is blocking HTTPS on fxp0
Answer: B
Explanation:
Explanation/Reference: https://kb.juniper.net/InfoCenter/index?
page=content&id=KB33979&cat=JATP_SERIES&actp=LIST
NEW QUESTION 34
Exhibit.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The custom infected hosts feed will not overwrite the Sky ATP infected host's feed.
- B. Juniper Networks will not investigate false positives generated by this custom feed.
- C. The custom infected hosts feed will overwrite the Sky ATP infected host's feed.
- D. Juniper Networks will investigate false positives generated by this custom feed.
Answer: B,C
Explanation:
Reference:
https://www.juniper.net/documentation/en_US/junos-space18.1/policy-enforcer/topics/task/configuration/junos-space-policyenforcer-custom-feeds-infected-host-configure.html
NEW QUESTION 35
Click the Exhibit button.
Referring to the exhibit, which three types of traffic would be examined by the IPS policy between Switch-1 and Switch-2? (Choose three.)
- A. ICMP
- B. TCP
- C. UDP
- D. ARP
- E. LLDP
Answer: A,B,C
NEW QUESTION 36
You have configured three logical tunnel interfaces in a tenant system on an SRX1500 device. When committing the configuration, the commit fails.
In this scenario, what would cause this problem?
- A. The SRX1500 device requires a tunnel PIC to allow for logical tunnel interfaces
- B. There is no GRE tunnel between the tenant system and master system allowing SSH traffic
- C. The SRX1500 device does not support more than two logical interfaces per tenant system
- D. There is no VPLS switch on the tenant system containing a peer It-0/0/0 interface
Answer: D
Explanation:
Explanation/Reference: https://www.juniper.net/documentation/en_US/junos/topics/topic-map/logical-systems- overview.html
NEW QUESTION 37
Click the Exhibit button.
The exhibit shows a snippet of a security flow trace. A user cannot open an SSH session to a server. Which action will solve the problem?
- A. Create a security policy that matches the traffic parameters
- B. Edit the source NAT to correct the translated address
- C. Create a route to the desired server
- D. Create a route entry to direct traffic into the configured tunnel
Answer: A
NEW QUESTION 38
Click the Exhibit button.
Referring to the exhibit, what is the maximum number of zones that are able to be created within all logical systems?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 39
Click the Exhibit button.
A user reports trouble when using SSH to a server outside your organization. The traffic traverses an SRX Series device that is performing NAT and applying security policies.
Referring to the exhibit, which configuration will allow you to see the bidirectional flow through the SRX Series device?
- A.
- B.
- C.
- D.
Answer: A
NEW QUESTION 40
Click the Exhibit button.
You have configured tenant systems on your SRX Series device.
Referring to the exhibit, which two actions should you take to facilitate inter-TSYS communication?
(Choose two.)
- A. Place the logical tunnel interfaces in a VPLS routing instance in the interconnect switch
- B. Connect each TSYS with the interconnect switch by configuring INET configured logical tunnel interfaces in the interconnect switch
- C. Place the logical tunnel interfaces in a virtual router routing instance in the interconnect switch
- D. Connect each TSYS with the interconnect switch by configuring Ethernet VPLS configured logical tunnel interfaces in the interconnect switch
Answer: B,C
NEW QUESTION 41
The monitor traffic interface command is being used to capture the packets destined to and the from the SRX Series device.
In this scenario, which two statements related to the feature are true? (Choose two.)
- A. This feature is supported on high-end SRX Series devices only.
- B. This feature does not capture transit traffic.
- C. This feature captures ICMP traffic to and from the SRX Series device.
- D. This feature is supported on both branch and high-end SRX Series devices.
Answer: B,D
Explanation:
Reference:
https://forums.juniper.net/t5/Ethernet-Switching/monitor-traffic-interface/td-p/462528
NEW QUESTION 42
You have a remote access VPN where the remote users are using the NCP client. The remote users can access the internal corporate resources as intended; however, traffic that is destined to all other Internet sites is going through the remote access VPN. You want to ensure that only traffic that is destined to the internal corporate resources use the remote access VPN.
Which two actions should you take to accomplish this task? (Choose two.)
- A. Enable IKEv2 within the VPN configuration on the SRX Series device
- B. Enable the split tunneling feature within the VPN configuration on the SRX Series device
- C. Configure split tunneling on the NCP profile on the remote client
- D. Configure the necessary traffic selectors within the VPN configuration on the SRX Series device
Answer: C,D
Explanation:
Reference:
vpns-with-ncp-exclusive-remote-access-client.html
NEW QUESTION 43
Which three roles or protocols are required when configuring an ADVPN? (Choose three.)
- A. shortcut suggester
- B. OSPF
- C. IKEv1
- D. shortcut partner
- E. BGP
Answer: A,B,D
NEW QUESTION 44
You must troubleshoot ongoing problems with IPsec tunnels and security policy processing. Your network consists of SRX340s and SRX5600s.
In this scenario, which two statements are true? (Choose two.)
- A. IPsec logs are written to the kmd log file by default
- B. You must enable data plane logging on the SRX340 devices to generate security policy logs
- C. You must enable data plane logging on the SRX5600 devices to generate security policy logs
- D. IKE logs are written to the messages log file by default
Answer: A,C
NEW QUESTION 45
You are configuring transparent mode on an SRX Series device. You must permit IP-based traffic only, and BPDUs must be restricted to the VLANs from which they originate.
Which configuration accomplishes these objectives?
- A.
- B.
- C.
- D.
Answer: A
Explanation:
Explanation/Reference: https://www.oreilly.com/library/view/juniper-srx-series/9781449339029/ch06.html
NEW QUESTION 46
Click the Exhibit button.
You have configured an ADVPN that is operational. However, OSPF will not establish correctly across the ADVPN tunnels.
Referring to the exhibit, which two commands will solve the problem? (Choose two.)
- A. [edit protocols ospf area 0.0.0.0]
user@srx# set interface st0.0 demand-circuit - B. [edit protocols ospf area 0.0.0.0]
user@srx# set interface st0.0 dynamic-neighbors - C. [edit protocols ospf area 0.0.0.0]
user@srx# set interface st0.0 topology advpn - D. [edit protocols ospf area 0.0.0.0]
user@srx# set interface st0.0 interface-type nbma
Answer: A,B
NEW QUESTION 47
What are two important function of the Juniper Networks ATP appliance solution? (Choose two.).
- A. Detection
- B. Statistics
- C. Analysis
- D. Filtration
Answer: A,C
Explanation:
Reference:
https://www.juniper.net/us/en/products-services/security/advanced-threat-prevention/
NEW QUESTION 48
Click the Exhibit button.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. You can secure inter-VLAN traffic with a security policy on this device
- B. You can secure intra-VLAN traffic with a security policy on this device
- C. The device cannot pass Layer 2 and Layer 3 traffic at the same time
- D. The device can pass Layer 2 and Layer 3 traffic at the same time
Answer: B,C
Explanation:
Explanation/Reference: https://www.juniper.net/documentation/en_US/junos/topics/topic-map/ethernet-port-switching- modes.html
NEW QUESTION 49
Click the Exhibit button.
Referring to the exhibit, you are attempting to enable IPsec power mode to improve IPsec VPN performance. However, you are unable to use IPsec power mode.
What is the problem?
- A. IPsec power mode cannot be used with advanced services
- B. IPsec power mode cannot be used with IPsec performance acceleration
- C. IPsec power mode requires that you configure a policy-based VPN
- D. IPsec power mode cannot be used with high IPsec maximum segment size values
Answer: A
NEW QUESTION 50
Which two modes are supported on Juniper Sky ATP? (Choose two.)
- A. secure wire mode
- B. tap mode
- C. private mode
- D. global mode
Answer: A,B
Explanation:
Explanation/Reference: https://www.juniper.net/documentation/en_US/release-independent/sky-atp/topics/concept/sky- atp-about.html
NEW QUESTION 51
You are configuring transparent mode on an SRX Series device. You must permit IP-based traffic only, and BPDUs must be restricted to the VLANs from which they originate.
Which configuration accomplishes these objectives?
A)
B)
C)
D)
- A. Option D
- B. Option A
- C. Option C
- D. Option B
Answer: D
NEW QUESTION 52
You are asked to configure an SRX Series device to bypass all security features for IP traffic from the engineering department.
Which firewall filter will accomplish this task?
- A.
- B.
- C.
- D.
Answer: B
NEW QUESTION 53
You are asked to merge to corporate network with the network from a recently acquired company. Both networks use the same private IPv4 address space (172.25.126.0/24). An SRX Series device servers as the gateway for each network.
Which solution allows you to merge the two networks without modifying the current address assignments?
- A. persistent NAT
- B. NAT46
- C. source NAT
- D. double NAT
Answer: D
Explanation:
Explanation/Reference: https://kb.juniper.net/InfoCenter/index?page=content&id=KB21286
NEW QUESTION 54
......
Conclusion
The Juniper JN0-635 exam and the associated JNCIP-SEC certification will provide you with a professional skillset and validation to take up tough security tasks as well as lead teams confidently. With such a certificate, you can stand out as an experienced networker who is proficient in the Juniper Networks Junos OS, which is utilized by several renowned companies. Hence, this designation can significantly increase your job opportunities and boost your networking career. Since there are plenty of preparatory resources, as outlined in this article, you can confidently face your official exam and pass it.
Verified JN0-635 Exam Dumps Q&As - Provide JN0-635 with Correct Answers: https://www.itexamsimulator.com/JN0-635-brain-dumps.html
