[Nov-2023] 350-601 Certification with Actual Questions from ITExamSimulator
Updated 350-601 Dumps PDF - 350-601 Real Valid Brain Dumps With 455 Questions!
Cisco 350-601 exam is a 120-minute exam that consists of 60-70 multiple-choice and drag-and-drop questions. 350-601 exam is designed to test the candidate's knowledge and skills in implementing and managing data center technologies. 350-601 exam is available in English and Japanese and can be taken at any Pearson VUE test center.
Cisco 350-601 exam is a computer-based exam that consists of 90-110 questions that need to be completed in 120 minutes. 350-601 exam is available in English and Japanese and can be taken at any Pearson VUE testing center. To pass the exam, candidates need to score at least 825 out of 1000 points. 350-601 exam fee is $400, and candidates can retake the exam after a 5-day waiting period. The Cisco 350-601 exam is ideal for network engineers, system administrators, and data center professionals who are responsible for implementing and managing data center technologies in large organizations.
NEW QUESTION # 61
Refer to the exhibit.
Which command is run from the Guest Shell to set the description on the first five interfaces of the Cisco Nexus switch?
- A. Option D
- B. Option A
- C. Option B
- D. Option C
Answer: A
NEW QUESTION # 62
A server engineer wants to control power usage on a Cisco UCS C-Series rack server down to the component level.
Which two components support specific power limits? (Choose two.)
- A. processor
- B. graphic card
- C. network controller
- D. storage controller
- E. memory
Answer: C,D
Explanation:
Section: Compute
Explanation/Reference:
NEW QUESTION # 63
Refer to the exhibit.
Cisco Fabric Services is enabled in the network. Which type of IP address is used by the Cisco Fabric Services protocol?
- A. IPv4 unicast address
- B. IPv4 gateway address
- C. IPv4 anycast address
- D. IPv4 multicast address
Answer: A
NEW QUESTION # 64
Drag and drop the characteristics from the left onto the NAS protocols on the right. Some characteristics are used more than once
Answer:
Explanation:
NEW QUESTION # 65
Which two methods are available to Manage an ACI REST API session authentication when a user is unauthenticated?
- A. GET aaaRefresh
- B. POST to aaaLogin
- C. DELETE to aaaLogout
- D. GET to aaaListDomains
- E. POST to aaaUserLogin
Answer: A,B
NEW QUESTION # 66
An engineer must recover configuration on a Cisco MDS 9000 Series switch from a previous version that was backed up to bootflash and then verify the restoration.
Drag and drop the commands on the left to the correct order on the right.
Answer:
Explanation:
NEW QUESTION # 67
A network engineer needs to upgrade the EPLDs of the fabric modules for a Cisco MDS director-class switch.
In which order are components reloaded during the process?
- A. one module and one supervisor at the time
- B. all fabric modules followed by the entire switching platform
- C. one fabric module at the time
- D. all fabric modules in parallel
Answer: C
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/8_x/release_notes/epld/epld_rn_8_4_1a
"To update all EPLDs sequentially with a single command, use the install all epld command with the module all fan-module all xbar all options. After each module is upgraded, it is power cycled to load the EPLD update."
NEW QUESTION # 68
An engineer is configuring HTTPS access to Cisco UCS Manager The engineer created a keyring and created the certificate request for the keyring Cisco UCS Manager continues to receive untrusted messages from a Firefox browser and a Chrome browser Which action must be taken as the next step in the HTTPS access configuration?
- A. Obtain a validated certificate from Cisco
- B. Install a trusted certificate in the browser store
- C. Create a trusted point
- D. Sign the certificate using the Cisco UCS Manager.
Answer: C
NEW QUESTION # 69
Which statement describes the rolling EPLD upgrade on a Cisco MDS 9000 Series Switch?
- A. Only the modules that are being upgraded are disrupted.
- B. All modules on the switch are disrupted.
- C. An EPLD upgrade is nondisruptive.
- D. The standby supervisor module is capable of performing the upgrade.
Answer: A
Explanation:
Section: Compute
NEW QUESTION # 70
Multiple roles are applied to a user on the Cisco MDS 9000 Series Switch.
Which statement is true?
- A. Access to a command takes priority over being denied access to a command.
- B. The first role assigned takes precedence over subsequent roles.
- C. The last role assigned takes precedence over previous roles.
- D. Any commands that have conflicting settings between roles are denied.
Answer: A
NEW QUESTION # 71
Which two statements about the process of upgrading an EPLD on a Cisco MDS 9000 series Switch are correct? (Choose two.)
- A. EPLDs can be upgraded without replacing the hardware.
- B. EPLDs can be upgraded only to the latest EPLD image.
- C. EPLD upgrades can be completed without powering down the module during the upgrade.
- D. An upgrade verification identifies the impact of each EPLD upgrade.
- E. The EPLDs for all the modules on a switch must be upgraded at the same time.
Answer: A,C
NEW QUESTION # 72
An engineer needs to monitor ingress traffic that arrives at interface Ethernet 1/3 that belongs to a Cisco Nexus 5600 Series Switch. The traffic analyzer machine located at interface Ethernet 1/5 is already monitoring other production, and the traffic analyzer must not be impacted by the traffic captured from the interface Eth1/3. The operations team allocated a traffic budget for the new monitoring session of 1 Gbps to meet this requirement Which set of commands configures the SPAN session?
- A. Option B
- B. Option D
- C. Option A
- D. Option C
Answer: C
Explanation:
Answer is not confirmed until having exact snap shots of the question. I believe there is something wrong.
NEW QUESTION # 73
A SAN administrator must Implement Infrastructure monitoring for the Fibre Channel storage environment. The storage environment consists of a standalone Cisco Nexus 9000 Series Switch and Cisco MDS 9000 Series Switches. The goal is to be able to visualize the SAN support VXLAN overlays and identify storage slow drain issues. Which monitoring solution accomplishes this task?
- A. Cisco Prime Infrastructure
- B. Cisco APIC
- C. Cisco DCNM
- D. Cisco Intersight
Answer: C
NEW QUESTION # 74
An engineer must configure a named VSAN when the fabric interconnect is in Fibre Channel switch mode The VSAN must meet these requirements:
* Named VSAN must be called "VSAN 10".
* VSAN ID must be 10.
* FCoE ID must be 20.
* VSAN 10 must be attached to port 2 in slot 1.
Which command set configures a VSAN when the fabric interconnect is in Fibre Channel switch mode?
- A. Option B
- B. Option D
- C. Option A
- D. Option C
Answer: C
NEW QUESTION # 75 
Refer to the exhibit. A pair of Cisco Nexus switches form a vPC. A new chassis s added to the pre-existing Cisco UCS domain. A new chassis must be discovered, and all links from the chassis to the LAN network must be established. Which set of actions accomplishes these requirements?
- A. Option A
- B. Option B
- C. Option C
- D. Option D
Answer: C
NEW QUESTION # 76
An engineer must recover configuration on a Cisco MDS 9000 Series switch from a previous version that was backed up to bootflash and then verify the restoration.
Drag and drop the commands on the left to the correct order on the right.
Answer:
Explanation:
Explanation
NEW QUESTION # 77
Refer to the exhibit.
Which setting must be configured to prevent reuse of passwords?
- A. Change Interval
- B. Change Count
- C. No Change Interval
- D. History Count
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Admin- Management/3-1/b_Cisco_UCS_Admin_Mgmt_Guide_3_1/ b_Cisco_UCS_Admin_Mgmt_Guide_3_1_chapter_011.html
NEW QUESTION # 78
Host 1 is in VLAN 100 located is DataCenter 1 and Host2 is in VLAN200 located in DataCenter2. Which OTV VLAN mapping configuration allows Layer 2 connectivity between these two hosts?
- A. Option B
- B. Option A
- C. Option D
- D. Option C
Answer: A
NEW QUESTION # 79
Which product includes prebuilt templates that can be used to customize fabric deployments?
- A. Cisco Tetration
- B. Cisco UCS Manger
- C. Cisco data Center Network Manger
- D. Cisco ACI
Answer: C
Explanation:
https://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/prime-data-center-networkmanager/datasheet-c78-740978.html
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/11_2_1/config_guide/lanfabric/ b_dcnm_fabric_lan/template_usage.html
NEW QUESTION # 80 
Refer to the exhibit An engineer must configure fabric binding on a Cisco MDS 9000 Senes Switch to match the output Which fabric database configuration accomplishes this goal?
- A. Option D
- B. Option A
- C. Option B
- D. Option C
Answer: A
NEW QUESTION # 81
An engineer is duplicating an existing Cisco UCS setup at a new site. What are two characteristics of a logical configuration backup of a Cisco UCS Manager database? (Choose two.)
- A. contains a file with an extension.tgz that stores all of the configurations
- B. contains all of the configurations
- C. contains the AAA and RBAC configurations
- D. contains the configuration organizations and locales
- E. contains the VLAN and VSAN configurations
Answer: D,E
Explanation:
Logical configuration-An XML file that includes all logical configuration settings such as service profiles, VLANs, VSANs, pools, and policies. You can use the file generated from this backup to import these configuration settings to the original fabric interconnect or to a different fabric interconnect. You cannot use this file for a system restore.
NEW QUESTION # 82
Refer to the exhibit.
In a bidirectional PIM network using Phantom RP as an RP redundancy mechanism, two Cisco NX-OS routers have these requirements:
* R1 must be the active RP.
* R2 must be the backup RP that is used only if R1 is not reachable
Drag and drop the configuration steps to complete the configuration for Router 2. Not all configuration steps are used.
Answer:
Explanation:
NEW QUESTION # 83
Refer to the exhibit.
An engineer is configuring a VSAN on the network Which option must be selected to create the VSAN?
- A. FC Zoning Enabled
- B. Common/Global
- C. Fabric B
- D. Fabric A
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/nx-os/configuration/guides/fabric/fabric_fm_4_2_published/fm_fabric/vsan.html
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-central/GUI-User-Guides/Storage-Mgmt/1-5/b_CiscoUCSCentral_Storage_Management_Guide_1-5/b_CiscoUCSCentral_Storage_Management_Guide_1-5_chapter_011.pdf
NEW QUESTION # 84
......
The Cisco 350-601 exam comprises of 90-110 questions, and the candidate has 120 minutes to complete it. 350-601 exam tests the candidate's knowledge of various data center technologies, including network design and implementation, storage networking, compute, automation, and security. 350-601 exam is designed to test the candidate's ability to work with Cisco data center technologies and best practices.
Pass Your 350-601 Exam Easily With 100% Exam Passing Guarantee: https://www.itexamsimulator.com/350-601-brain-dumps.html
100% Free 350-601 Exam Dumps Use Real CCNP Data Center Dumps: https://drive.google.com/open?id=1mFIf0UJ42SUC2QfOHWrupWzyVPIWQk0l
