Pass Exam With Full Sureness - 300-815 Dumps with 120 Questions
Verified 300-815 dumps Q&As - 100% Pass from ITExamSimulator
NEW QUESTION # 20
What is the relationship between partition, time schedule, and time period in Time-of-Day routing in Cisco Unified Communications Manager?
- A. A partition can have multiple time schedules assigned. A time schedule contains one or more time periods.
- B. A partition can have one time schedule assigned. A time schedule contains only one time period.
- C. A partition can have multiple time schedules assigned. A time schedule contains only one time period.
- D. A partition can have one time schedule assigned. A time schedule contains one or more time periods.
Answer: A
NEW QUESTION # 21
Which section under the Real-Time Monitoring Tool allows for reviewing the call flow and signaling for a SIP call in real time?
- A. System > Tools > Trace and Log Central
- B. Voice/Video > Session Trace Log View > Real Time Data
- C. Analysis Manager > Inventory > Trace File Repositories
- D. Voice/Video > Session Trace Log View > Open From Local Disk
Answer: B
Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications- manager-callmanager/213583-procedure-to-analyse-call-flow-of-sip-ca.html
NEW QUESTION # 22
A network engineer designs a new dial plan and wants to block a certain range of numbers (8135100 through
8135105). What is the most specific route pattern that can be configured to block only the numbers in this range?
- A. 81XXXXX
- B. 813510[012345]
- C. 813510[12345]
- D. 813510[^0-5]
Answer: B
Explanation:
Section: Call Control and Dial Planning
NEW QUESTION # 23
An administrator sees the voice register pool 1 command in a Cisco UCME configuration. Which configuration is occurring in this section?
- A. configuration items common for all SIP phones
- B. configuration for a pool of SIP phones (similar to device pool on Cisco UCM)
- C. configuration for SIP registrar service
- D. configuration for a single SIP phone
Answer: D
NEW QUESTION # 24
Why would RTP traffic that is sent from the originating endpoint fail to be received on the far endpoint?
- A. The far end connection data (c=) in the SDP was overwritten by deep packet inspection in the call signaling path.
- B. A firewall in the media path is blocking TCP ports 16384-32768.
- C. The RTP traffic is arriving beyond the jitter buffer on the receiving end.
- D. Cisco Unified Communications Manager invoked media termination point resources.
Answer: B
Explanation:
Section: Signaling and Media Protocols
NEW QUESTION # 25
If all patterns below are configured in Cisco Unified Communications Manager which would be used when dialing the pattern "123"?
- A. 1XX (urgent Priority Set)
- B. 12[2-5]
- C. 12X (urgent priority set)
- D. 12!
Answer: C
NEW QUESTION # 26
Which two statements are correct with respect to the Client Matter Code setting in the route pattern configuration? (Choose two.)
- A. The Client Matter Code feature does not support overlap sending because the Cisco Unified CM cannot determine when to prompt the user for the code.
- B. The Client Matter Code feature does support overlap sending because the Cisco Unified Communications Manager can determine when to prompt the user for the code.
- C. If you check the Allow Overlap Sending check box, you can also check the Require Client Matter Code check box.
- D. The Client Matter Code has the option to configure Authorization Level such as in the Forced Authorization Code.
- E. If you check the Allow Overlap Sending check box, the Require Client Matter Code check box becomes disabled.
Answer: A,E
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmfeat/ CUCM_BK_F3AC1C0F_00_cucm-features-services-guide-100/CUCM_BK_F3AC1C0F_00_cucm-features- services-guide-100_chapter_010000.pdf
NEW QUESTION # 27
Refer to the exhibit.
Which change to the translation rule is needed to strip only the leading 9 from the digit string 9123548?
- A. rulel /^9\(\d*\)/^1/
- B. rule 1/^9123548/^1/
- C. rule 1 /^9\(.*\)/A1/
- D. rulel /.*\(3548S\)/^1/
Answer: C
NEW QUESTION # 28
Refer to the exhibit.
An engineer configures Cisco Unified Border Element to connect the enterprise VoIP network with a SIP telephony provider. Calls are not working in either direction. What must be configured in the dial peer 1 to fix the issue?
- A. codec g729
- B. session-protocol sipv2
- C. answer-address 555 ........
- D. incoming called number 555.......
Answer: B
NEW QUESTION # 29
Refer to the exhibit.
Which INVITE is sent to 10.10.100.123 as a result of this log?
A)
B)
C)
- A. Option D
- B. Option C
- C. Option B
- D. Option A
Answer: B
NEW QUESTION # 30
Refer to the exhibit.
An engineer configures Cisco Unified Border Element to connect the enterprise VoIP network with a SIP telephony provider. Calls are not working in either direction. What must be configured in the dial peer 1 to fix the issue?
- A. codec g729
- B. session-protocol sipv2
- C. answer-address 555 ........
- D. incoming called number 555.......
Answer: B
NEW QUESTION # 31
Refer to the exhibit.
An engineer is troubleshooting an issue where inbound calls to Cisco UCM with early media fail to establish. While investigating the issue, the engineer finds that Cisco UCM is set to require a PRACK. but the Cisco Unified Border Element is not sending it. Which command is causing this issue?
- A. voice-class sip early-media update block
- B. voice-class midcall-signaling block
- C. voice-class sip conn-reuse
- D. voice-class sip rel1xx disable
Answer: D
NEW QUESTION # 32
Refer to the exhibit. An engineer is troubleshooting an issue where inbound Calls are failing after they transferred. The provider reports that update is not supported, and this is causing the calls to fail. Which command should resolve this issue?
- A. rel1xx require "100rel"
- B. no contact-passig
- C. no midcall-signaling passthru
- D. no update-callerId
Answer: A
NEW QUESTION # 33
Refer to the exhibit.
Users report that when they dial the emergency number 9911 from any internal phone, it takes a long time to connect with the emergency operator. Which action resolves this issue?
- A. Adjust the service parameter T302 timet to the desired value.
- B. Point the emergency pattern directly to the PSTN gateway.
- C. Check the Urgent Priority check box under 9.911 pattern.
- D. Adjust the service parameter T204 timer to the desired value.
Answer: C
NEW QUESTION # 34
A network engineer designs a new dial plan and wants to block a certain range of numbers (8135100 through 8135105). What is the most specific route pattern that can be configured to block only the numbers in this range?
- A. 81XXXXX
- B. 813510[012345]
- C. 813510[12345]
- D. 813510[^0-5]
Answer: B
NEW QUESTION # 35
Refer to the exhibit.
A call mode through the Cisco Unified Border Element to pilot 2000 is foiling. What is causing the call to foil?
- A. The destination pattern is incorrect for the dialed number.
- B. The Cisco Unified Border Element is not receiving a response to its OPTION keepahves.
- C. VAD was not disabled on the outgoing dial poor.
- D. No codecs are configured on the dial peers
Answer: A
NEW QUESTION # 36
Refer to the exhibit.
An administrator is troubleshooting why users are not hearing audio when dialing long distance numbers across their Cisco Unified Border Element. The customer's carrier has a requirement that dialing long distance requires an access code to be entered. Looking at the exhibit, what two actions can be taken to correct signaling? (Choose two.)
- A. Enable PRACK.
- B. Enable Early Offer on the Cisco Unified Border Element.
- C. Enable Mid-Call Signaling Consumption.
- D. Enable Media Flow Around
- E. Enable the supplementary-service media-renegotiate command.
Answer: A,B
NEW QUESTION # 37
Refer to the exhibit.
An engineer configures Cisco Unified Border Element to connect the enterprise VoIP network with a SIP telephony provider. Calls are not working in either direction. What must be configured in the dial peer 1 to fix the issue?
- A. session-protocol sipv2
- B. codec g729
- C. incoming called number 555.......
- D. answer-address 555 ........
Answer: C
NEW QUESTION # 38
When locations-based Call Admission Control denies the call, which two masks can AAR apply when routing the call through the PSTN? (Choose two.)
- A. enterrise alternate number mask
- B. AAR destination mask
- C. +E.164 alternate number mask
- D. external phone number mask
- E. called party transform mask
Answer: B,D
Explanation:
Section: Cisco Unified CM Call Control Features
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/collab10/collab10/dialplan.html
NEW QUESTION # 39
In Cisco Unified Communications Manager, which tool do you use to check SIP traces?
- A. MTP
- B. CCSIP
- C. OS Administration Page
- D. RTMT
Answer: D
NEW QUESTION # 40
An administrator is troubleshooting call failures on an H.323 gateway via the CLI. To see signaling for media and call setup, which debug must the Administrator turn on?
- A. debug H.224 asn1
- B. debug H.323 asn 1
- C. debug H.246 asn 1
- D. debug H.225 media
- E. debug H.323 messages
Answer: A
NEW QUESTION # 41
......
300-815 Dumps Full Questions - Exam Study Guide: https://www.itexamsimulator.com/300-815-brain-dumps.html
Pass 300-815 Exam in First Attempt Guaranteed 2024 Dumps: https://drive.google.com/open?id=1ztCm-yt2YQvmegrf_Q_yiCATnJILMbJ6
