Pass Fortinet NSE6_FWF-6.4 With ITExamSimulator Exam Dumps - Updated on Dec-2021
Fully Updated NSE6_FWF-6.4 Dumps - 100% Same Q&A In Your Real Exam
NEW QUESTION 15
What type of design model does FortiPlanner use in wireless design project?
- A. Analytical model
- B. Architectural model
- C. Predictive model
- D. Integration model
Answer: B
Explanation:
FortiPlanner will look familiar to anyone who has used architectural or home design software.
NEW QUESTION 16
When configuring a wireless network for dynamic VLAN allocation, which three IETF attributes must be supplied by the radius server? (Choose three.)
- A. 83 Tunnel-Preference
- B. 65 Tunnel-Medium-Type
- C. 81 Tunnel-Private-Group-ID
- D. 64 Tunnel-Type
- E. 58 Egress-VLAN-Name
Answer: B,C,D
Explanation:
The RADIUS user attributes used for the VLAN ID assignment are:
IETF 64 (Tunnel Type)-Set this to VLAN.
IETF 65 (Tunnel Medium Type)-Set this to 802
IETF 81 (Tunnel Private Group ID)-Set this to VLAN ID.
NEW QUESTION 17
Refer to the exhibits.
Exhibit A
Exhibit B
A wireless network has been created to support a group of users in a specific area of a building. The wireless network is configured but users are unable to connect to it. The exhibits show the relevant controller configuration for the APs and the wireless network.
Which two configuration changes will resolve the issue? (Choose two.)
- A. Disable intra-vap-privacy for the Authors vap-wireless network
- B. For both interfaces in the wtp-profile, configure set vaps to be "Authors"
- C. For both interfaces in the wtp-profile, configure vap-all to be manual
- D. Increase the transmission power of the AP radio interfaces
Answer: A,C
NEW QUESTION 18
What is the first discovery method used by FortiAP to locate the FortiGate wireless controller in the default configuration?
- A. Static
- B. Multicast
- C. DHCP
- D. Broadcast
Answer: C
NEW QUESTION 19
Where in the controller interface can you find a wireless client's upstream and downstream link rates?
- A. On the controller CLI, using the diag wireless-controller wlac -d sta command
- B. On the AP CLI, using the cw_diag ksta command
- C. On the AP CLI, using the cw_diag -d sta command
- D. On the controller CLI, using the WiFi Client monitor
Answer: A
NEW QUESTION 20
When configuring Auto TX Power control on an AP radio, which two statements best describe how the radio responds? (Choose two.)
- A. When the AP detects any interference from a trusted neighboring AP stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.
- B. When the AP detects any other wireless signal stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.
- C. When the AP detects PF Interference from an unknown source such as a cordless phone with a signal stronger that -70 dBm, it will increase its transmission power until it reaches the maximum configured TX power limit.
- D. When the AP detects any wireless client signal weaker than -70 dBm, it will reduce its transmission power until it reaches the maximum configured TX power limit.
Answer: B,D
NEW QUESTION 21
Which statement is correct about security profiles on FortiAP devices?
- A. FortiGate performs inspection the wireless traffic
- B. Security profiles on FortiAP devices can use FortiGate subscription to inspect the traffic
- C. Disable DTLS on FortiAP
- D. Only bridge mode SSIDs can apply the security profiles
Answer: D
NEW QUESTION 22
Which factor is the best indicator of wireless client connection quality?
- A. The channel utilization of the channel the client is using
- B. Downstream link rate, the connection rate for the AP to the client
- C. The receive signal strength (RSS) of the client at the AP
- D. Upstream link rate, the connection rate for the client to the AP
Answer: C
Explanation:
SSI, or "Received Signal Strength Indicator," is a measurement of how well your device can hear a signal from an access point or router. It's a value that is useful for determining if you have enough signal to get a good wireless connection.
NEW QUESTION 23
Refer to the exhibits.
Exhibit A
Exhibit B
Exhibit C
A wireless network has been installed in a small office building and is being used by a business to connect its wireless clients. The network is used for multiple purposes, including corporate access, guest access, and connecting point-of-sale and IoT devices.
Users connecting to the guest network located in the reception area are reporting slow performance. The network administrator is reviewing the information shown in the exhibits as part of the ongoing investigation of the problem. They show the profile used for the AP and the controller RF analysis output together with a screenshot of the GUI showing a summary of the AP and its neighboring APs.
To improve performance for the users connecting to the guest network in this area, which configuration change is most likely to improve performance?
- A. Increase the transmission power of the AP radios
- B. Reduce the number of wireless networks being broadcast by the AP
- C. Enable frequency handoff on the AP to band steer clients
- D. Install another AP in the reception area to improve available bandwidth
Answer: A
NEW QUESTION 24
Which two phases are part of the process to plan a wireless design project? (Choose two.)
- A. Project information phase
- B. Site survey phase
- C. Installation phase
- D. Hardware selection phase
Answer: B,C
Explanation:
Reference:
https://www.automation.com/en-us/articles/2015-2/wireless-device-network-planning-and-design
NEW QUESTION 25
Six APs are located in a remotely based branch office and are managed by a centrally hosted FortiGate. Multiple wireless users frequently connect and roam between the APs in the remote office.
The network they connect to, is secured with WPA2-PSK. As currently configured, the WAN connection between the branch office and the centrally hosted FortiGate is unreliable.
Which configuration would enable the most reliable wireless connectivity for the remote clients?
- A. Configure a tunnel mode wireless network and enable split tunneling to the local network
- B. Configure a bridge mode wireless network and enable the Local standalone configuration option
- C. Configure a bridge mode wireless network and enable the Local authentication configuration option
- D. Install supported FortiAP and configure a bridge mode wireless network
Answer: A
NEW QUESTION 26
Which administrative access method must be enabled on a FortiGate interface to allow APs to connect and function?
- A. SSH
- B. HTTPS
- C. Security Fabric
- D. FortiTelemetry
Answer: C
NEW QUESTION 27
......
Latest NSE6_FWF-6.4 Exam Dumps - Valid and Updated Dumps: https://www.itexamsimulator.com/NSE6_FWF-6.4-brain-dumps.html
Verified NSE6_FWF-6.4 Exam Questions Certain Success: https://drive.google.com/open?id=1P2iSlbYUe1S_O89AaI_RzVqzFwcQl-Vq
