VMware 5V0-22.23 Certification All-in-One Exam Guide Oct-2023
Get Real 5V0-22.23 Exam Dumps [Oct-2023] Practice Tests
VMware vSAN Specialist (v2) certification exam is a tough exam that tests your skills in areas like vSAN architecture, deployment, management, and troubleshooting. 5V0-22.23 exam consists of 60 multiple-choice questions that you need to answer within 105 minutes. To pass the exam, you need to score a minimum of 300 points out of 500 points.
NEW QUESTION # 17
A customer wishes to host a new range of applications with high-performance needs, specifically, low latency.
The applications are required to be hosted at company-owned edge locations, each with minimal rack space (three host slots per edge location for this project).
Which deployment options would satisfy the customer's needs, while maximizing the amount of capacity available per deployment?
- A. A new three-node vSAN 8.0 All-Flash Cluster with OSA in each edge location Each application VM configured with a RAID-5 VM storage policy
- B. A new three-node vSAN 8.0 All-Flash Cluster with ESA in each edge location Each application VM configured with a RAID-1 VM storage policy
- C. A new three-node vSAN 8.0 All-Flash Cluster with ESA in each edge location Each application VM configured with a RAID-5 VM storage policy
- D. A new three-node vSAN 8.0 All-Flash Cluster with OSA in each edge location Each application VM configured with a RAID-1 VM storage policy
Answer: D
Explanation:
Explanation
To satisfy the customer's needs for high-performance, low-latency applications at edge locations, the best deployment option is to use a new three-node vSAN 8.0 All-Flash Cluster with OSA in each edge location and configure each application VM with a RAID-1 VM storage policy. This option will provide the following benefits:
All-flash clusters offer the highest performance and lowest latency for vSAN, as they use flash devices for both cache and capacity tiers. Flash devices have faster read and write operations than magnetic disks, and they also support advanced features such as deduplication, compression, and encryption.
OSA stands for One Socket Architecture, which means that each host has only one CPU socket with multiple cores. This reduces the licensing cost and complexity of vSphere and vSAN, as well as the power consumption and cooling requirements of the hosts. OSA also improves the performance of vSAN by eliminating the NUMA effect, which is the latency caused by accessing memory or devices across different CPU sockets.
RAID-1 is a mirroring technique that creates two copies of each data component and places them on different hosts. This provides high availability and fault tolerance for the application VMs, as they can survive the failure of one host or disk. RAID-1 also offers better performance than RAID-5 or RAID-6, as it does not incur any parity overhead or additional write operations.
The other options are not optimal for the customer's needs, as they either sacrifice performance or capacity.
Option A uses RAID-5, which is an erasure coding technique that splits each data component into three data segments and one parity segment, and distributes them across four hosts. This reduces the capacity consumption by 25%, but it also increases the write latency and network traffic, as each write operation requires four hosts to participate. Option C uses ESA, which stands for Enterprise Storage Architecture, which means that each host has two CPU sockets with multiple cores. This increases the licensing cost and complexity of vSphere and vSAN, as well as the power consumption and cooling requirements of the hosts.
ESA also introduces the NUMA effect, which can degrade the performance of vSAN by adding latency to access memory or devices across different CPU sockets. Option D uses RAID-5 with ESA, which combines the disadvantages of both options A and C.
NEW QUESTION # 18
An administrator is deploying a new two-node vSAN cluster with a shared witness to a remote location.
Which requirement must be met?
- A. The ESXi hosts must have SSDs or NVMe configured for Virtual Flash File System.
- B. The ESXi host's drives must be configured in RAID 1 to support Failures to Tolerate of 1.
- C. The ESXi hosts must have a minimum of 64 GBs of memory.
- D. The ESXi host's controller cache and advanced features must be disabled.
Answer: C
Explanation:
Explanation
To deploy a new two-node vSAN cluster with a shared witness, the administrator must meet several requirements, one of which is that the ESXi hosts must have a minimum of 64 GBs of memory. This is because each host must have enough memory to run the VMs and also to support the vSAN metadata overhead. The other options are not requirements for a two-node vSAN cluster with a shared witness. The ESXi hosts do not need SSDs or NVMe for Virtual Flash File System, as they can use any supported storage devices for vSAN. The ESXi host's controller cache and advanced features do not need to be disabled, as they can be used to improve performance and reliability. The ESXi host's drives do not need to be configured in RAID 1, as vSAN uses its own software-defined RAID mechanism to provide Failures to Tolerate.
References: Shared Witness for 2-Node vSAN Deployments; Two-Node Cluster Requirements
NEW QUESTION # 19
A vSAN administrator is investigating vSAN performance related problems but cannot find any vSAN performance statistics on the cluster summary page.
Why is this situation occurring?
- A. vSAN performance service is not enabled.
- B. vSAN performance statistics are only available via CLI.
- C. The vRealize Operations Manager is not integrated with vSAN cluster.
- D. The administrator has read-only permissions on the cluster level.
Answer: A
Explanation:
Explanation
The reason why the vSAN administrator cannot find any vSAN performance statistics on the cluster summary page is that the vSAN performance service is not enabled. The vSAN performance service is a feature that collects and analyzes performance metrics and displays them in graphical charts in vCenter. The vSAN performance service must be turned on manually for each vSAN cluster, as it is not enabled by default. The other options are not correct. The integration of vRealize Operations Manager with the vSAN cluster is not required to view vSAN performance statistics, as they are available in vCenter. The administrator's permissions on the cluster level do not affect the visibility of vSAN performance statistics, as they are accessible to any user who can view the cluster. vSAN performance statistics are not only available via CLI, as they can also be viewed in vCenter using the vSAN performance service. References: About the vSAN Performance Service; Enable or Disable the Performance Service
NEW QUESTION # 20
A vSAN administrator wants to transition from VMware Update Manager to vSphere Lifecycle Manager.
Which element is a mandatory requirement to create an image?
- A. Component
- B. ESXi Version
- C. Vendor Add-On
- D. Firmware and Drivers Add-On
Answer: B
Explanation:
Explanation
To create an image using vSphere Lifecycle Manager, the mandatory requirement is to specify the ESXi version. An image is a collection of software components that define the desired state of hosts in a cluster. An image must include at least one ESXi version component, which determines the base hypervisor software for the hosts. Optionally, an image can also include other components, such as vendor add-ons, firmware and drivers add-ons, or custom components. The other options are not correct. A component is a generic term for any software element that can be included in an image, but it is not a specific type of component. A firmwareand drivers add-on is an optional component that provides firmware and drivers updates for hardware devices on the hosts. A vendor add-on is an optional component that provides vendor-specific software for the hosts. References: About Images; Create an Image
NEW QUESTION # 21
Which vSAN maintenance mode option should be used to avoid storage policy non-compliance?
- A. Full data migration
- B. Partial maintenance mode
- C. Ensure accessibility
- D. No data migration
Answer: A
Explanation:
Explanation
To avoid storage policy non-compliance, the vSAN maintenance mode option that should be used is Full data migration. This option evacuates all data from the host to other hosts in the cluster and maintains the current object compliance state. This means that the VM objects will have access to all their replicas and will be compliant with their assigned storage policies. The other options might result in storage policy non-compliance, as they do not guarantee full data redundancy or policy adherence. Ensure accessibility only migrates the components that are essential for running the VMs, but might not have access to all their replicas.
Partial maintenance mode is not a valid option for vSAN clusters. No data migration does not evacuate any data from the host and might result in VM unavailability or data loss. References: Working with Maintenance Mode; Place a Member of vSAN Cluster in Maintenance Mode
NEW QUESTION # 22
An administrator has deployed a new vSAN OSA cluster that contains eight hosts and needs to configure a storage policy for the currently deployed database virtual machines. The requirements state that if two hosts in the vSAN OSA cluster fail, all virtual machines are unaffected.
Which RAID configuration must the administrator use in this storage policy to achieve the best performance for the database virtual machines?
- A. RAID-5
- B. RA1D-1
- C. RAID-0
- D. RAID-6
Answer: B
Explanation:
Explanation
To achieve the best performance for the database virtual machines and tolerate two host failures in a vSAN OSA cluster, the administrator must use RAID-1 as the RAID configuration in the storage policy. RAID-1 is a mirroring technique that creates multiple replicas of each object across different hosts. RAID-1 provides the best performance among the available RAID configurations, as it does not involve any parity calculations or stripe splitting. To tolerate two host failures, the administrator must set the Failures to Tolerate (FTT) policy to
2, which means that each object will have three replicas. The other options are not correct. RAID-5 and RAID-6 are erasure coding techniques that split each object into data segments and parity segments across different hosts. RAID-5 can tolerate one host failure, while RAID-6 can tolerate two host failures. However, both RAID-5 and RAID-6 have lower performance than RAID-1, as they involve more complex calculations and network traffic. RAID-0 is a striping technique that splits each object into multiple stripes across different hosts. RAID-0 does not provide any data redundancy or fault tolerance, and therefore cannot tolerate any host failure. References: RAID Configurations, FTT, and Host Requirements; RAID 5 or RAID 6 Design Considerations
NEW QUESTION # 23
A customer wants to validate if Skyline online health is working for vSAN and finds out that Skyline is not fully configured yet.
What two requirements must be met to make sure that Skyline online health will work? (Choose two.)
- A. Enable Skyline Health on the vSAN Cluster
- B. Have vCenter on version 7 or higher
- C. Have a working Internet connection
- D. Add the Skyline license into Virtual Center
- E. Enable CEIP and join the program
Answer: C,E
Explanation:
Explanation
To make sure that Skyline online health will work for vSAN, two requirements must be met: enable CEIP and join the program, and have a working Internet connection. CEIP stands for Customer Experience Improvement Program, which is a voluntary program that collects anonymous product usage data from customers who participate in it. By enabling CEIP and joining the program, customers can benefit from Skyline online health, which provides proactivenotifications and recommendations for software and hardware issues based on VMware Analytics Cloud. A working Internet connection is also required for Skyline online health to communicate with VMware Analytics Cloud and receive online notifications. The other options are not requirements for Skyline online health. References: About the vSAN Skyline Health; Skyline Health
NEW QUESTION # 24
A vSAN administrator encounters a non-compliant virtual machine and the compliance status of some of its objects is noncompliant. vSAN is able to locate a full replica of 55% of the votes for the noncompliant objects.
What will vSAN do with the virtual machine?
- A. Power off the virtual machine
- B. Mark the virtual machine as orphaned
- C. Mark the virtual machine as inaccessible as vSAN is not able to locate more than 60% of the votes for the objects
- D. Mark the virtual machine as compliant and automatically recover the noncompliant objects
Answer: D
Explanation:
Explanation
If vSAN is able to locate a full replica of 55% of the votes for the noncompliant objects of a virtual machine, vSAN will mark the virtual machine as compliant and automatically recover the noncompliant objects. This is because vSAN uses a quorum-based algorithm to determine object availability and compliance. An object is considered available if more than 50% of its votes are accessible, and compliant if it meets its assigned storage policy requirements. In this case, since 55% of the votes are accessible, vSAN can access a full replica of each object and restore its compliance state by rebuilding any missing or corrupted components. The other options are not correct. vSAN will not power off, mark as inaccessible, or mark as orphaned a virtual machine that has more than 50% of its votes accessible, as these actions would result in unnecessary downtime or data loss.
References: Object States That Indicate Problems in vSAN; Accessibility of Virtual Machines Upon a Failure in vSAN
NEW QUESTION # 25
A customer has deployed a new vSAN cluster with the following configuration:
5 x vSAN ReadyNodes
All Flash
12 TB Raw Storage
vSAN 8 is deployed with ESA.
New VMs are configured with a RAID-5 VM policy.
Which statement is accurate?
- A. vSAN will spread the components across all of the disk groups
- B. RAID 5 will provide an FTT=2 level of protection in this case
- C. vSAN will use a 4+1 RAID-5 data placement scheme with parity will be used
- D. vSAN will use a 2+1 RAID-5 data placement scheme with parity will be used
Answer: C
Explanation:
Explanation
vSAN will use a 4+1 RAID-5 data placement scheme with parity will be used is the correct answer because vSAN 8 ESA uses adaptive RAID-5 erasure coding that depends on the number of hosts in the cluster. If the cluster has 6 or more hosts, vSAN will use a 4+1 RAID-5 scheme, where the data is written as a stripe of 4 data bits and 1 parity bit across 5 hosts. This provides a failure tolerance of 1 (FTT=1) and a space efficiency of 1.25x. If the cluster has less than 6 hosts (3 to 5), vSAN will use a 2+1 RAID-5 scheme, where the data is written as a stripe of 2 data bits and 1 parity bit across 3 hosts. This also provides a failure tolerance of 1 (FTT=1) but a space efficiency of 1.5x. In this case, the cluster has 5 hosts, so vSAN will use the 4+1 RAID-5 scheme.
The other options are incorrect for the following reasons:
A, vSAN will use a 2+1 RAID-5 data placement scheme with parity will be used, is incorrect because vSAN will only use this scheme if the cluster has less than 6 hosts but more than 2 hosts. In this case, the cluster has 5 hosts, so vSAN will use the 4+1 RAID-5 scheme.
B, RAID 5 will provide an FTT=2 level of protection in this case, is incorrect because RAID 5 can only provide an FTT=1 level of protection, regardless of the number of hosts or the data placement scheme.
To achieve an FTT=2 level of protection, vSAN would need to use RAID 6 erasure coding, which requires at least 6 hosts in the cluster.
D, vSAN will spread the components across all of the disk groups, is incorrect because vSAN will not necessarily spread the components across all of the disk groups in the cluster. vSAN will only spread the components across as many disk groups as needed to meet the storage policy requirements and to balance the load and capacity. In this case, vSAN will only need to spread the components across 5 disk groups for each stripe of RAID-5 data. References:
VMware vSAN Specialist v2 Exam Preparation Guide, page 11
Adaptive RAID-5 Erasure Coding with the Express Storage Architecture in vSAN 8
NEW QUESTION # 26
An administrator is upgrading multiple vSAN Witness nodes with vLCM (single image management) that are used for vSAN Stretched and two-node Clusters.
What two witness node types can the administrator upgrade? (Choose two.)
- A. Physical witness node
- B. Appliance witness node
- C. Nested witness node
- D. Dedicated witness node
- E. Shared witness node
Answer: B,C
Explanation:
Explanation
To upgrade multiple vSAN Witness nodes with vLCM (single image management) that are used for vSAN Stretched and two-node Clusters, the administrator can upgrade two witness node types: appliance witness node and nested witness node. An appliance witness node is a virtual ESXi host that runs on a physical ESXi host and contains the witness components of VM objects stored in the vSAN cluster. A nested witness node is a virtual ESXi host that runs on another virtual ESXi host and contains the witness components of VM objects stored in the vSAN cluster. Both types of witness nodes can be managed by vLCM as independent nodes since vSphere 7.0 Update 3, as long as they are version 7.0 Update 2 or later. The other options are not correct. A shared witness node is a witness node that serves multiple vSAN clusters, which is not supported by vLCM. A dedicated witness node is a witness node that serves only one vSAN cluster, which is not a specific type of witness node. A physical witness node is aphysical ESXi host that contains the witness components of VM objects stored in the vSAN cluster, which cannot be upgraded by vLCM. References: vSphere Lifecycle Manager and the vSAN Witness Hosts; Shared Witness for 2-Node vSAN Deployments
NEW QUESTION # 27
A vSAN administrator is using the vSAN ReadyNode Sizer to build a new environment. While entering the cluster configurations, a fellow colleague inquires about the Operations Reserve option.
What is the purpose of using this option?
- A. Provides space for internal operations
- B. Reserves space for tolerating failures
- C. Allocates space forvSAN uparades
- D. Configures space for external operations
Answer: A
Explanation:
Explanation
The purpose of using the Operations Reserve option in the vSAN ReadyNode Sizer is to provide space for internal operations such as deduplication, compression, encryption, snapshots, clones, and rebalancing. The Operations Reserve is calculated as a percentage of the total usable capacity of the vSAN cluster. The default value is 30%, but it can be adjusted based on the expected workload characteristics and data services requirements. The other options are not correct, as they do not describe the Operations Reserve option. Configuring space for external operations, reserving space for tolerating failures, and allocating space for vSAN upgrades are not part of the Operations Reserve option. References: 2, section 2; , section 3
NEW QUESTION # 28
A vSAN administrator has a vSAN cluster that is using vSphere Lifecycle Manager (vLCM) to manage hypervisor, server drivers, and firmware. All hosts in the cluster are compliant according to the vLCM image.
A 10GB NIC on the servers is experiencing issues, and the vSAN administrator determines a new network driver will resolve the problem. Unfortunately, the required NIC driver is a newer version compared to the driver provided by the most recent Vendor Add-on.
Which action should the vSAN administrator take to ensure the latest network driver is installed on the NIC before remediation?
- A. Modify the vLCM image to omit the NIC Driver, and then manually update the servers with the required NIC driver
- B. Make sure the vLCM image is configured to use the most recent version of the Vendor Add-on
- C. Add an individual component to the vLCM image that has the updated NIC driver
- D. Remove theVendor Add-on from the vLCM image, and then manually install the network driver on the servers
Answer: C
Explanation:
Explanation
To ensure the latest network driver is installed on the NIC before remediation, the vSAN administrator should add an individual component to the vLCM image that has the updated NIC driver. This action allows the administrator to override the driver provided by the vendor add-on and use a newer version that is compatible with the ESXi version and the hardware device. The administrator can add an individual component to the vLCM image by importing it from a ZIP file or selecting it from the vLCM depot. The other options are not correct. Making sure the vLCM image is configured to use the most recent version of the vendor add-on will not help, as the required NIC driver is a newer version than the one provided by the vendor add-on. Removing the vendor add-on from the vLCM image or modifying the vLCM image to omit the NIC driver will not ensure the latest network driver is installed on the NIC, as these actions will leave the NIC without any driver update. Manually installing or updating the network driver on the servers is not recommended, as it might cause inconsistency and non-compliance in the vLCM image. References: vSphere Lifecycle Manager Image Components; [Add an Individual Component to an Image]
NEW QUESTION # 29
A vSAN administrator has a cluster configured with a Storage Pool that was moved to a new physical DC.
Upon checking on the vSAN cluster health status, one of the ESXi hosts has two storage devices in a degraded state and must be replaced.
What must the vSAN administrator do to restore the health of the vSAN cluster with minimum risk?
- A. Remove the devices from the storage pool, replace the storage devices, claim the new devices in vSAN
- B. Remove the host from the cluster, replace the faulty disks, re-add the host to the cluster
- C. Remove the host from ySAN configuration, replace the faulty disks, re-create the storage pool
- D. Remove the entire storage pool, install the new devices, re-create the storage pool
Answer: A
Explanation:
Explanation
To restore the health of the vSAN cluster with minimum risk, the vSAN administrator must remove the devices from the storage pool, replace the storage devices, and claim the new devices in vSAN. This is because removing and replacing devices in a storage pool does not affect the availability or performance of the objects stored in that pool. The storage pool automatically rebalances the objects across the remaining devices in the pool when a device is removed, and distributes the objects across the new devices when they are added. This process is faster and safer than removing and re-adding a host to the cluster, which requires resynchronization of all objects on that host4 References: 4: VMware vSphere Storage Guide, page 133 :
VMware vSAN Design and Sizing Guide, page 38
NEW QUESTION # 30
Which VMware solution requires vSAN usage?
- A. VMware Horizon
- B. VMware Cloud Foundation
- C. VMware Telco Cloud Automation
- D. VMware Aria Automation
Answer: B
Explanation:
Explanation
The VMware solution that requires vSAN usage is VMware Cloud Foundation. VMware Cloud Foundation is an integrated software stack that bundles compute virtualization (VMware vSphere), storage virtualization (VMware vSAN), network virtualization (VMware NSX), and cloud management and monitoring (VMware vRealize Suite) into a single platform that can be deployed on premises or as a service within a public cloud.
VMware Cloud Foundation relies on vSAN as the primary storage solution for its workload domains, which are logical pools of resources that can be used to run different types of workloads. The other options are not correct. VMware Horizon, VMware Telco Cloud Automation, and VMware Aria Automation are VMware solutions that do not require vSAN usage, although they can benefit from it. VMware Horizon is a platform that delivers virtual desktops and applications across a variety of devices and locations, and it can use any supported storage solution, including vSAN. VMware Telco Cloud Automation is a cloud-native orchestration and automation platform that enables communication service providers to accelerate the deployment and lifecycle management of network functions and services across any network and cloud. It can use any supported storage solution, including vSAN. VMware Aria Automation is not a valid VMware solution name.
References: VMware Cloud Foundation Overview; VMware Horizon Overview; VMware Telco Cloud Automation Overview
NEW QUESTION # 31
An administrator is tasked to create a Kerberos secured NFS v4.1 file share.
Which information is minimally required during the configuration of the File Service?
- A. Active Directory Domain. Organizational Unit, User Account. Password
- B. Active Directory Domain, User Account, Password
- C. Kerberos Server, User Account, Password
- D. Organizational Unit, User Account, Password
Answer: B
Explanation:
Explanation
To create a Kerberos secured NFS v4.1 file share, the administrator needs to provide the following information during the configuration of the File Service:
Active Directory Domain: The domain name of the Active Directory server that provides Kerberos authentication service for the NFS server and clients. For example, example.com.
User Account: The user name of the Active Directory account that has permissions to join the NFS server to the domain and create service principal names (SPNs) for the NFS server. For example, [email protected].
Password: The password of the Active Directory account that is used for authentication. For example, P@ssw0rd.
These information are required to enable Kerberos security for NFS 4.1 and allow the NFS server to obtain a Kerberos ticket from the Active Directory server. The administrator also needs to specify the NFS share name, path, and access permissions1 References: 1: VMware vSphere Storage Guide, page 118
NEW QUESTION # 32
What is the minimum required number of hosts to provide data redundancy for a vSAN stretched cluster using dual-site mirroring and local protection with 1 failure - RAID-1 (Mirroring)?
- A. 3 hosts
- B. 6 hosts
- C. 3 hosts
- D. 4 hosts
Answer: B
Explanation:
Explanation
The minimum required number of hosts to provide data redundancy for a vSAN stretched cluster using dual-site mirroring and local protection with 1 failure - RAID-1 (Mirroring) is six hosts. This is because a vSAN stretched cluster requires at least three hosts per site, and each site must have enough hosts to tolerate one host failure. Therefore, the minimum configuration is three hosts per site, plus one witness host at a third site, for a total of six hosts. References: [VMware vSAN Specialist v2 EXAM 5V0-22.23], page 14
NEW QUESTION # 33
An architect is designing a vSAN stretched cluster and needs to ensure that data remains on a given site in case of a network partition between the sites.
Which configuration would do this?
- A. IvSoh ere High Availability
- B. vCenter High Availability
- C. Preferred and secondary sites
- D. Distributed Resource Scheduler
Answer: C
Explanation:
Explanation
In a vSAN stretched cluster configuration, both data sites are active sites, but one site must be designated as the preferred site and the other site as the secondary or nonpreferred site. This configuration helps to ensure that data remains on a given site in case of a network partition between the sites. If the network connection between the two active sites is lost, vSAN continues operation with the preferred site, unless it is resyncing or has another issue. The site that leads to maximum data availability is the one that remains in operation. The other options are not relevant to this scenario. References: Introduction to Stretched Clusters; vSAN Stretched Cluster Guide
NEW QUESTION # 34
In which type of environment is vSAN storage used as a mandatory, primary storage?
- A. VMware Horizon
- B. VMware Cloud on AWS
- C. TanzuKubernetes Grid Integrated Edition
- D. VMware Aria Automation
Answer: B
Explanation:
Explanation
VMware Cloud on AWS is a service that delivers a fully managed VMware SDDC on AWS infrastructure. It uses vSAN as the mandatory, primary storage for the SDDC clusters. vSAN provides a high-performance, resilient, and secure shared storage solution for the VMware Cloud on AWS environment. The other options are not correct, as vSAN is not mandatory or primary for them. VMware Horizon, VMware Aria Automation, and Tanzu Kubernetes Grid Integrated Edition can use vSAN as an optional or secondary storage solution, but they can also use other types of storage. References: , section 1.1; , section 1.2
NEW QUESTION # 35
An administrator has to perform maintenance on one of the hosts in a three-node vSAN Cluster.
Which maintenance mode option will give the administrator the best availability for the VMs with the least effort and data transfer?
- A. Ensure accessibility
- B. Full data migration
- C. Migrate all VMs and their storage from the host to a different storage system
- D. Migrate all VMs and their storage from the host to a different vSphere cluster
Answer: A
Explanation:
Explanation
To perform maintenance on one of the hosts in a three-node vSAN cluster with the best availability for the VMs with the least effort and data transfer, the maintenance mode option that should be used is Ensure accessibility. This option migrates only enough components to ensure that all accessible VMs remain accessible, but does not guarantee full data redundancy or policy compliance. This option is also the only evacuation mode available for a three-node cluster or a cluster with three fault domains, as there are not enough hosts to perform full data migration or re-protection after a failure. The other options are not correct.
Migrating all VMs and their storage from the host to a different storage system or a different vSphere cluster would require more effort and data transfer than using Ensure accessibility, as well as additional resources and configuration steps. Full data migration is not possible in a three-nodecluster, as it would require at least four hosts to evacuate all data from one host and maintain full redundancy and policy compliance.
References: Place a Member of vSAN Cluster in Maintenance Mode; Working with Maintenance Mode
NEW QUESTION # 36
A customer has deployed a new vSAN Cluster with the following configuration:
* 6 x vSAN ReadyNodes
* All Flash
* 12 TB Raw Storage
* vSAN 8 is deployed with ESA.
VMs are configured with a RAID-5 VM policy.
During failure testing, before the new platform is placed into production one of the ESXi hosts is made unavailable.
Which RAID-5 data placement schemes will vSAN use with this failure condition?
- A. Some VM data will be unavailable until the failed ESXi host is recovered
- B. vSAN can protect the platform using adaptive RAID 5 if the ESXi host fails to return
- C. The data components on the hosts will be marked as degraded
- D. VMware HA will migrate the storage objects to another node in the cluster
Answer: C
Explanation:
Explanation
When a host in a vSAN stretched cluster goes offline, the data components on the hosts will be marked as degraded. This means that the data is still available, but the redundancy level is reduced. vSAN will try to rebuild the missing components on another host in the same fault domain, if there is enough capacity and resources. If the host comes back online within 60 minutes, vSAN will resync the data and restore the redundancy level. If the host does not come back online within 60 minutes, vSAN will rebuild the missing components on another fault domain, if there is enough capacity and resources. This will incur additional network traffic across the witness link. References: VMware vSAN Specialist v2 EXAM 5V0-22.23, page 17
NEW QUESTION # 37
What is the purpose of host rebuild reserve in vSAN?
- A. Stores vSphere HA heartbeats
- B. Reserves space for internal operations
- C. Allocates capacity for vCLS
- D. Reserves space in case of single host failure
Answer: D
Explanation:
Explanation
The host rebuild reserve is a feature that allows vSAN to reserve space in the cluster for vSAN to be able to repair in case of a single host failure. This reservation is set to one host worth of capacity, which means that if one host in the vSAN cluster fails and no longer contributes storage, there is still sufficient capacity remaining in the cluster to rebuild and re-protect all vSAN objects. This feature prevents the creation of new VMs or powering on VMs if such operations consume the reserved space. By default, the host rebuild reserve is disabled, but it can be enabled in the vSAN Services configuration. The other options are not related to the hostrebuild reserve. References: vSAN Capacity Management in v7.0U1; Configure Reserved Capacity
NEW QUESTION # 38
A vSAN administrator needs to enable vSAN ESA.
Which two requirements need to be met? (Choose two.)
- A. vSAN Witness Appliance
- B. vSAN ReadyNodes configuration
- C. vSAN Build Your Own configuration
- D. vSAN Standard license
- E. vSAN Advanced license
Answer: B,D
Explanation:
Explanation
To enable vSAN ESA, two requirements that need to be met are: vSAN Standard license or higher, and vSAN ReadyNodes configuration. vSAN Standard license or higher is required to use vSAN ESA, as it is a feature that is only available in vSAN 8.0 or later versions. vSAN ESA is an optional, alternative architecture to vSAN OSA that is designed to process and store data with higher efficiency, scalability, and performance.
vSAN ReadyNodes configuration is required to use vSAN ESA, as it is a hardware configuration that is pre-configured, tested, and certified for VMware Hyper-Converged Infrastructure Software. Each vSAN ReadyNode is optimally configured for vSAN ESA with the required amount of CPU, memory, network, and storage NVMe devices. The other options are not correct. vSAN Build Your Own configuration is not supported for vSAN ESA, as it might not meet the hardware requirements or compatibility for vSAN ESA.
vSAN Witness Appliance is not required to use vSAN ESA, as it is only needed for stretched cluster or two-node cluster configurations. References: vSAN Express Storage Architecture; vSAN ReadyNode Hardware Guidance
NEW QUESTION # 39
An administrator has 24 physical servers that need to be configured with vSAN. The administrator needs to ensure that a single rack failure is not going to affect the data availability. The number of racks used should be minimized.
What has to be done and configured to achieve this goal?
- A. Configure disk groups with a minimum of four capacity disks in each server and distribute them across four racks
- B. Distribute servers across at least two different racks and configure two fault domains
- C. Enable deduplication and compression
- D. Distribute servers across at least three different racks and configure three fault domains
Answer: D
Explanation:
Explanation
To ensure that a single rack failure is not going to affect the data availability, while minimizing the number of racks used, the administrator has to do the following:
Distribute servers across at least three different racks. This is because vSAN supports up to three fault domains per cluster, which can be used to tolerate one or two failures. If only two racks are used, then only one failure can be tolerated4 Configure three fault domains. A fault domain is a logical grouping of hosts that share a common failure point, such as a rack or a power supply. By configuring fault domains, vSAN can place replicas of an object across different fault domains, so that a failure within one fault domain does not result in data loss orunavailability4 References: 4: VMware vSAN Specialist v2 Exam Preparation Guide, page 13
NEW QUESTION # 40
......
Last 5V0-22.23 practice test reviews: Practice Test VMware dumps: https://www.itexamsimulator.com/5V0-22.23-brain-dumps.html
Try 5V0-22.23 Free Now! Real Exam Question Answers: https://drive.google.com/open?id=17sLa2R8WTNclIAOEI3Fmow1LE45cbIVZ
