[Oct-2023] Dumps Practice Exam Questions Study Guide for the NSE4_FGT-7.2 Exam
NSE4_FGT-7.2 Dumps with Practice Exam Questions Answers
Fortinet NSE4_FGT-7.2 certification is highly valued in the industry as it demonstrates the candidate’s ability to handle complex network security challenges using Fortinet security solutions. Fortinet NSE 4 - FortiOS 7.2 certification is recognized globally and is a prerequisite for higher-level Fortinet certifications such as NSE5 and NSE7. Fortinet NSE 4 - FortiOS 7.2 certification exam is available in multiple languages and can be taken online or at a Pearson VUE testing center. Candidates who pass the exam receive a certificate and a digital badge that can be shared on social media platforms and professional networking sites. Obtaining the NSE4_FGT-7.2 certification can help network security professionals advance in their careers and increase their earning potential.
NEW QUESTION # 94
An administrator has configured a strict RPF check on FortiGate. Which statement is true about the strict RPF check?
- A. Strict RPF allows packets back to sources with all active routes.
- B. Strict RPF checks the best route back to the source using the incoming interface.
- C. Strict RPF checks only for the existence of at least one active route back to the source using the incoming interface.
- D. The strict RPF check is run on the first sent and reply packet of any new session.
Answer: B
Explanation:
Strict Reverse Path Forwarding (RPF) is a security feature that is used to detect and prevent IP spoofing attacks on a network. It works by checking the routing information for incoming packets to ensure that they are coming from the source address that is indicated in the packet's header. In strict RPF mode, the firewall will check the best route back to the source of the incoming packet using the incoming interface. If the packet's source address does not match the route back to the source, the packet is dropped. This helps to prevent attackers from spoofing their IP address and attempting to access the network.
NEW QUESTION # 95
What are two benefits of flow-based inspection compared to proxy-based inspection? (Choose two.)
- A. FortiGate performs a more exhaustive inspection on traffic.
- B. FortiGate uses fewer resources.
- C. FortiGate allocates two sessions per connection.
- D. FortiGate adds less latency to traffic.
Answer: B,D
NEW QUESTION # 96
Which two settings are required for SSL VPN to function between two FortiGate devices? (Choose two.)
- A. The client FortiGate requires a client certificate signed by the CA on the server FortiGate.
- B. The client FortiGate uses the SSL VPN tunnel interface type to connect SSL VPN.
- C. The server FortiGate requires a CA certificate to verify the client FortiGate certificate.
- D. The client FortiGate requires a manually added route to remote subnets.
Answer: B,C
Explanation:
https://docs.fortinet.com/document/fortigate/7.0.9/administration-guide/508779/fortigate-as-ssl-vpn-client To establish an SSL VPN connection between two FortiGate devices, the following two settings are required:
The server FortiGate requires a CA certificate to verify the client FortiGate certificate: The server FortiGate will use a CA (Certificate Authority) certificate to verify the client FortiGate certificate, ensuring that the client device is trusted and allowed to establish an SSL VPN connection.
The client FortiGate requires the SSL VPN tunnel interface type to connect SSL VPN: The client FortiGate must have an SSL VPN tunnel interface type configured in order to establish an SSL VPN connection. This interface type will be used to connect to the server FortiGate over the SSL VPN.
NEW QUESTION # 97
Which three authentication timeout types are availability for selection on FortiGate? (Choose three.)
- A. Idle-timeout
- B. new-session
- C. hard-timeout
- D. auth-on-demand
- E. soft-timeout
Answer: A,B,C
NEW QUESTION # 98
To complete the final step of a Security Fabric configuration, an administrator must authorize all the devices on which device?
- A. FortiAnalyzer
- B. Downstream FortiGate
- C. FortiManager
- D. Root FortiGate
Answer: D
NEW QUESTION # 99
View the exhibit.
Which of the following statements are correct? (Choose two.)
- A. The TunnelB route is the primary route for reaching the remote site. The TunnelA route is used only if the TunnelB VPN is down.
- B. Dead peer detection must be disabled to support this type of IPsec setup.
- C. This is a redundant IPsec setup.
- D. This setup requires at least two firewall policies with the action set to IPsec.
Answer: A,C
Explanation:
https://docs.fortinet.com/document/fortigate/6.2.4/cookbook/632796/ospf-with-ipsec-vpn-for-network-redundancy
NEW QUESTION # 100
Refer to the exhibit.
Based on the administrator profile settings, what permissions must the administrator set to run the diagnose firewall auth list CLI command on FortiGate?
- A. CLI diagnostics commands permission
- B. Read/Write permission for Log & Report
- C. Read/Write permission for Firewall
- D. Custom permission for Network
Answer: A
Explanation:
Explanation
https://kb.fortinet.com/kb/documentLink.do?externalID=FD50220
NEW QUESTION # 101
Examine this FortiGate configuration:
How does the FortiGate handle web proxy traffic coming from the IP address 10.2.1.200 that requires authorization?
- A. It authenticates the traffic using the authentication scheme SCHEME2.
- B. It always authorizes the traffic without requiring authentication.
- C. It drops the traffic.
- D. It authenticates the traffic using the authentication scheme SCHEME1.
Answer: D
Explanation:
Explanation
"What happens to traffic that requires authorization, but does not match any authentication rule? The active and passive SSO schemes to use for those cases is defined under config authentication setting"
NEW QUESTION # 102
Refer to the exhibit.
The global settings on a FortiGate device must be changed to align with company security policies. What does the Administrator account need to access the FortiGate global settings?
- A. Change Administrator profile
- B. Enable two-factor authentication
- C. Change password
- D. Enable restrict access to trusted hosts
Answer: A
NEW QUESTION # 103
View the exhibit.
Which of the following statements are correct? (Choose two.)
- A. The TunnelB route is the primary route for reaching the remote site. The TunnelA route is used only if the TunnelB VPN is down.
- B. Dead peer detection must be disabled to support this type of IPsec setup.
- C. This is a redundant IPsec setup.
- D. This setup requires at least two firewall policies with the action set to IPsec.
Answer: A,C
Explanation:
Explanation
https://docs.fortinet.com/document/fortigate/6.2.4/cookbook/632796/ospf-with-ipsec-vpn-for-network-redundanc
NEW QUESTION # 104
Which of the following statements about backing up logs from the CLI and downloading logs from the GUI are true? (Choose two.)
- A. Log downloads from the GUI are limited to the current filter view
- B. Log backups from the CLI cannot be restored to another FortiGate.
- C. Log downloads from the GUI are stored as LZ4 compressed files.
- D. Log backups from the CLI can be configured to upload to FTP as a scheduled time
Answer: A,B
NEW QUESTION # 105
Refer to the exhibit.
Given the routing database shown in the exhibit, which two statements are correct? (Choose two.)
- A. The port3 default route has the lowest metric.
- B. The port1 and port2 default routes are active in the routing table.
- C. The port3 default route has the highest distance.
- D. There will be eight routes active in the routing table.
Answer: B,C
NEW QUESTION # 106
Which two statements are correct about NGFW Policy-based mode? (Choose two.)
- A. NGFW policy-based mode supports creating applications and web filtering categories directly in a firewall policy
- B. NGFW policy-based mode policies support only flow inspection
- C. NGFW policy-based mode does not require the use of central source NAT policy
- D. NGFW policy-based mode can only be applied globally and not on individual VDOMs
Answer: A,B
NEW QUESTION # 107
What is the limitation of using a URL list and application control on the same firewall policy, in NGFW policy-based mode?
- A. It limits the scanning of application traffic to the application category only.
- B. It limits the scanning of application traffic to the browser-based technology category only.
- C. It limits the scanning of application traffic to the DNS protocol only.
- D. It limits the scanning of application traffic to use parent signatures only.
Answer: A
Explanation:
Explanation
https://docs.fortinet.com/document/fortigate/5.6.0/cookbook/38324/ngfw-policy-based-mode In policy-based mode on a next-generation firewall (NGFW), you can use a URL list and application control in the same firewall policy to control traffic to and from specific websites or applications. However, there is a limitation to consider when using these features together:
It limits the scanning of application traffic to the application category only: The URL list and application control both rely on the firewall to inspect traffic and make decisions about what to allow or block. However, the URL list is limited to inspecting traffic at the URL level, while the application control can inspect traffic at a deeper level, such as at the application layer. This means that the application control is more comprehensive and can provide more granular control over specific applications, while the URL list is limited to controlling traffic at the URL level.
NEW QUESTION # 108
Refer to the FortiGuard connection debug output.
Based on the output shown in the exhibit, which two statements are correct? (Choose two.)
- A. There is at least one server that lost packets consecutively.
- B. A local FortiManager is one of the servers FortiGate communicates with.
- C. FortiGate is using default FortiGuard communication settings.
- D. One server was contacted to retrieve the contract information.
Answer: C,D
NEW QUESTION # 109
......
Free Fortinet NSE 4 NSE4_FGT-7.2 Exam Question: https://www.itexamsimulator.com/NSE4_FGT-7.2-brain-dumps.html
NSE4_FGT-7.2 by Fortinet NSE 4 Actual Free Exam Practice Test: https://drive.google.com/open?id=15jE0Pm3nwVZ8cb562UJVrzFVjlwvWkqn
